T-Line products

Adapter cable rear light with plug for Ducati, KTM3 cables with Japan round plug female Ø 3,5mm

Wire turning pliers with spring 200mm painted black polished head for professional screw locking for wire thickness up to 0,8 mmNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Screw locking wire - best suitable for screw locking- size: 0,7 mm (Ø) x 15 m (L)- stainless steel- suitable for wire turning pliers Note: This product is not assigned to any special vehicle - Please check if this article fits and/or is needed.

SMD license plate light Byte Dimensions: H 30 x Ø 13 mm M6 black aluminium ECE-tested Cable length 116mm

TRW Lucas Bleeder Unit MCE200 is suitable for bleeding brake systems, clutch systems and steering systems using compressed air. 1/4" connection for compressed air systems.Note: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Stand Steadystand Multi, front wheel rockerColour: black for tyre width 90-200 mm Tyres Ø 15-21 inch Long durability, high quality powder-coated material Fully adjustable without tools / easy to adjust system Special rubber feet to prevent slipping Maximum stability thanks to the complete front wheel locking system Fully adjustable, also suitable for larger motorcyclesNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Mirror adapter M10 x 1.25 mm right thread in / M8 x 1.25 mm left thread out,black, dimensions 25 x 13mm

Turn signal lenses for Ducati Streetfighter Monster 696 796 1100 Multistrada 1200 tintedOurturn signal lenses correspond in form and function to the original lenses and are simply fitted to the original bracket in exchange. E-approval Easy to replace Smoke grey lens Supplied in pairs (=2 pieces) including colored bulbs

universal flasher relay for LED flashers 3 pole 12V 1-100WMicroprocessor controlled flasher module (flasher relay) stabilises the flashing frequency 100% Failure of the hazard warning lights, after installation of accessory indicators is now a thing of the past electronic, 12 V, 1-100 W Can be used for mixed indicators (LED/bulb) as well as for hazard lights (B=switched plus (49) L=signal (49a), E=ground (31)

Flasher relay for Suzuki with 7 pole connector, stabilizes 100% the flashing frequency. Failure of the hazard warning lights, after installation of accessory turn signals is now a thing of the past. Flasher module is already equipped with the original japanese connectors (depending on model). Simple plug in assembly in a few minutes. No soldering, no cutting of wires, no mounting of high power resistors or similar half-hearted solutions. 2 pins, 12 Volt, 1-100 W

Flasher relay with 2 pole connection, stabilizes 100% of the flashing frequency. Failure of the hazard flasher system, after installation of accessory flashers is now a thing of the past. The relay is already equipped with a 2-pole Japanese plug (depending on model). Simple plug in assembly in a few minutes. No soldering, no cutting of wires, no mounting of high power resistors or similar half-hearted solutions. 2 pins, 12 volts, 1-100 W.It is absolutely necessary to check yourself if the relay on your vehicle has the right plug

Blinker adapter cable for connection to the original wiring harness, with resistor for Ducati see suitable for, (15 Ohm / 10Watt)Pair price = 2 pcs.

Turn signal adapter cable for Aprilia to ensure the connection of accessory turn signals to the original wiring harness.pair price = 2 pcs.Attention: on some models the adapter cables only fit front or rear. Please check before buying.

Turn signal adapter cable for various Yamaha (MT07 | MT-09) to ensure the connection of accessories turn signals on the original wiring harness.pair price = 2 pcsAttention: Please check yourself before buying. For some models the adapter cables fit only front or rear and MT-07 or MT-09 have different connectors and the shown to fit your vehicle.

Turn signal adapter cable adapter cable with resistor and plugBMW S1000R | M1000R and RR (2017-2026)for LED turn signals against too fast flashing or error messageDelivered are 2 pieces (pair price)Attention: for the vehicles with turn signals | rear light rear, the plugs fit only in front!

Turn signal adapter cable for BMW S1000RR and S1000R (2017-2020) front and rear turn signals to connect to the original wiring harness. 2 pieces are delivered (price per pair)

Turn signal adaptor cable to connect to the original wiring harness, for Ducati Hypermotard, Monster, Streetfighter see list.Price per pair = 2 pcs.

Flasher adapter cable for various Ducati to connect accessory flashers to the original wiring harness. price per pair = 2 pcs.Attention: on some models the adapter cables only fit at the front or rear. Please check yourself before purchase

Flasher adapter cable for various Triumph to connect accessory flashers to the original wiring harness. price per pair = 2 pcs.Attention: on some models the adapter cables only fit at the front or rear. Please check yourself before purchase

Turn signal adapter cable for various Kawasaki with original turn signal with bulb (not LED) to ensure the connection of accessory indicators to the original wiring harness.Price per pair = 2 pcsAttention: on some models the adapter cables only fit at the front or rear. The adapter cables will not fit if there are position lights in the original turn signals.Please check yourself before purchase.

Flasher adapter cable for various Yamaha to connect accessory flashers to the original wiring harness.Price per pair = 2 pcs.Attention: on some models the adapter cables only fit at the front or rear. The adapter cables do not fit if there are position lights in the original turn signals.Please check yourself before purchase

Flasher adapter cable for various Suzuki to connect accessory flashers to the original wiring harness.Price per pair = 2 pcs.Attention: on some models the adapter cables only fit at the front or rear. The adapter cables do not fit if there are position lights in the original turn signals.Please check yourself before purchase

Flasher adapter cable for various Honda to connect accessory flashers to the original wiring harness.Price per pair = 2 pcs.Attention: on some models the adapter cables only fit at the front or rear. The adapter cables do not fit if there are position lights in the original turn signals.Please check yourself before purchase

Mirror adapter M8 x 1.25 mm left thread in M8 x 1.25 mm right thread out - black - dimensions 25x13mm

Mirror adapter M8 x 1.25 mm right thread in / M10 x 1.25 mm left thread out, black, dimensions 25x13mm

Adapter cable for rear light with socket BAY15D 3 cables with Japan round plug female Ø 3,5mm

LED parking light round Lens Ø=14.8mm ECE-approved Length 28mm

Stand Vehicle Rocker black for tyre width 90-130 mm Tyres Ø 16-18 inchNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Tinted rear light for Yamaha R1 (2015-2025) R6 (2017-2025) R7 (2022-2025) R9 (2025-2026)The LED taillights correspond in form and function to the original LED taillight and are simply mounted on the original bracket in exchange.E-approvalcomplete unitSmoke gray tinted lensBrake and driving light functionConnection via the compact plug on the vehicle

Taillight for Yamaha R6 (2008-2016) clearThe LED taillights correspond in form and function to the original LED taillight and are simply mounted to the original bracket in exchange. E-approval complete unit clear diffusing lens Brake and driving light function Connection via the compact plug available on the vehicle

Taillight for Yamaha R125 MT-125 tintedThe LED taillights correspond in form and function to the original LED taillight and are simply mounted to the original bracket in exchange. E-approval complete unit Smoke grey tinted lens Brake and driving light function Connection via the compact plug available on the vehicle

Taillight for Yamaha R1 clearThe LED taillights correspond in form and function to the original LED taillight and are simply mounted to the original bracket in exchange. E-approval complete unit clear diffusing lens Brake and driving light function Connection via the compact plug available on the vehicle

Taillight for Yamaha MT03 (2006-2014) tinted Taillight f. Yamaha MT03 dark tinted ECE-approved

Taillight for Yamaha FZ1 FZ8 tintedThe LED taillights correspond in form and function to the original LED taillight and are simply mounted to the original bracket in exchange.E-approval complete session Smoke grey tinted diffusing lens Brake and driving light function Connection via the compact plug available on the vehicleATTENTION: For ABS models resistance is required! Item number 188975-004

Taillight for Triumph Daytona 675 Street Triple 675 Speed Triple tinted Taillight dark tinted ECE-approved Triumph Daytona 675 06-12 Triumph Daytona 675 R 11-12

Tinted taillight for Suzuki Hayabusa GSX 1300 R (2008–2012)The LED taillights match the original LED taillight in both form and function and can be easily installed by simply swapping them into the original mounting bracket.E-approvedComplete unitSmoke-gray tinted diffuser lensBrake and tail light functionConnection via the vehicle’s existing compact connector

Taillight for Suzuki GSX-S 1000 GSX-S 1000 F GSX-S 750 tintedThe LED taillights correspond in form and function to the original LED taillight and are simply mounted in exchange to the original bracket. E-approval complete unit Smoke grey tinted lens Brake and driving light function Connection via the compact plug available on the vehicle

Taillight for Suzuki GSX-R 1000 tintedThe LED taillights correspond in form and function to the original LED taillight and are simply mounted in exchange to the original bracket. E-approval complete unit Smoke grey tinted lens Brake and driving light function Connection via the compact plug available on the vehicle

Tail light for MV Agusta Brutale 675 800 F3 675 F3 800 tintedThe LED tail lights correspond in form and function to the original LED tail light and are simply mounted in exchange to the original bracket. E-approval complete unit Smoke grey tinted lens Brake and driving light function Connection via the compact plug available on the vehicle

Tail light for KTM 625 640 660 950 R 990 R T Supermoto Enduro tintedThe LED tail lights correspond in form and function to the original LED tail light and are simply mounted to the original bracket in exchange. E-approval complete unit Smoke grey tinted lens Brake and driving light function Suitable for the following models: KTM 625 SMC (year of manufacture 05-06) KTM 640 LC4 Supermoto KTM 660 SMC (year of manufacture 05-06) KTM 990 T / R Supermoto (Bj. 09-10) KTM 990 Supermoto (year 08-09) KTM 990 R Supermoto (09-10) KTM 950 R Supermoto (year 07-08) KTM 950 Supermoto (year of construction 05-09) KTM 950 R Super Enduro (built 07-08)

Taillight for Kawasaki Z 800 ZX-6R ZX-6R 636 tintedThe LED taillights correspond in form and function to the original LED taillight and are simply mounted to the original bracket in exchange. E-approval complete unit Smoke grey tinted lens Brake and driving light function Connection via the compact plug available on the vehicle

Taillight for Kawasaki ZX-10R clearThe LED taillights correspond in form and function to the original LED taillight and are simply mounted to the original bracket in exchange. E-approval complete unit clear diffusing lens Brake and driving light function Connection via the compact plug available on the vehicle

Taillight for Kawasaki Z 1000 Z 750 tintedThe LED taillights correspond in form and function to the original LED taillight and are simply mounted to the original bracket in exchange. E-approval complete unit dark tinted diffusing lens Brake and driving light function Connection via the compact plug available on the vehicle

Tinted Taillight for Kawasaki Z1000 | Z1000SX | Ninja 1100 SX | Versys 650The LED taillights match the original LED taillight in both form and function and can be easily installed by swapping them into the original mounting bracket.E-approvedComplete unitSmoke-gray tinted diffuser lensBrake and tail light functionConnection via the vehicle’s existing compact connector

Taillight for Honda CB650F | CBR650F | NC750 tintedThe LED taillights correspond in form and function to the original LED taillight and are simply mounted to the original bracket in exchange.E-approval complete session Smoke grey tinted diffusing lens Brake and driving light function Connection via the compact plug available on the vehiclefits the following Honda models:MSX 125 13- CB 650F 14- CBR650F 14- CTX 700N 13-

Taillight for Ducati Monster 821 1200 1200 R tintedThe LED taillights correspond in form and function to the original LED taillight and are simply mounted to the original bracket in exchange. E-approval complete unit Smoke grey tinted lens Brake and driving light function Connection via the compact plug available on the vehicle

Taillight for Ducati Hypermotard Hyperstrada 821 939 tintedThe LED taillights correspond in form and function to the original LED taillight and are simply mounted to the original bracket in exchange. E-approval complete unit Smoke grey tinted lens Brake and driving light function Connection via the compact plug available on the vehicle

Taillight for Ducati Hypermotard 796 - 1100EVO dark tintedThe LED taillights correspond in form and function to the original LED taillight and are simply mounted to the original bracket in exchange. E-approval complete unit tinted diffusing lens Brake and driving light function Connection via the compact plug available on the vehicle

Tail light for BMW S1000R S1000RR dark tintedThe LED tail lights correspond in form and function to the original LED tail light and are simply mounted to the original bracket in exchange. E-approval complete unit Smoke grey tinted lens Brake and driving light function Connection via the compact plug available on the vehicle

Tail light for Aprilia RSV4 Tuono V4 dark tintedThe LED tail lights correspond in form and function to the original LED tail light and are simply mounted in exchange to the original bracket. E-approval complete unit Smoke grey tinted lens Brake and driving light function Connection via the compact plug available on the vehicle

LED mini tail and brake light clear ECE-approved with license plate light Width 82 mm, height 29 mm, depth 39 mmNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Brake bleeder set with nipple adapter, one-way valve and collection container A clean sweep! Complete setNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Nut for Ducati axle nut front + rear SW 30 and 36High-quality tool made of aluminium for gentle tightening and loosening of the rear and front wheel nut. The precise manufacture of the key flat (12 teeth) ensures optimum power transmission to the wheel nut. This means that damage such as that caused by standard tools is virtually impossible. High quality silver anodisedCombination socket wrench for the wheel axle nuts front 30 mm rear 36 mm with 1/2 inch square approx. 105 grams anodized colourlessly

Nut for Ducati 848 axle nut front + rear SW 46 and 30 Combination socket wrench for the wheel axle nuts front 30 mm rear 46 mm with 1/2 inch square approx. 105 grams colorless anodized

Nut for Ducati axle nut front + rear SW 55 and 30 Combination socket wrench for the wheel axle nuts front 30 mm rear 55 mm with 1/2 inch square approx. 105 grams colorless anodized

Front stand assembly stand DR060 with arbor, blackPP motorcycle front stand, mounting standexclusive design in absolute top quality35 mm ø pipe construction (no cheap goods)bent in one pieceWheels with rubber rollersMounting of the fork in high-quality plastic chamfered steel pinunbeatable price-performance ratioblack matt powder-coatedNote: This product is not assigned to a specific vehicle - Please check if this item fits and/or is needed.

Front stand assembly stand DR068 with mandrel, adjustable, blackPP Motorcycle front stand, mounting standfits on upsidedown forks with hole at the bottom of the forkexclusive design in absolute top quality35 mm ø pipe construction (no cheap goods)bent in one piececenter Adjustable to different fork widthsWheels with rubber rollersMounting of the fork in high-quality plastic chamfered steel pinunbeatable price-performance ratioBlack powder-coatedNote: This product is not assigned to a specific vehicle - Please check if this item fits and/or is needed.

CNC aluminum housing for Streak indicatorse.g. for mounting under the handlebar fittings or at the rearblackPairNote: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

Blinker with rear light and brake light Stick tintedblacktintedRubber armThread: M8Dimensions: L: 49.5 mm H: 25 mm W: 18 mmECE-approvedPair priceNote: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

SMD blinkerblack tinted Rubber arm Thread: M8 Dimensions: L: 49.5 mm H: 25 mm W: 18 mm ECE-approved Pair priceCable assignment: black=ground - yellow=plusNote: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

LED blinker parking light combination Dualblack tinted Rubber arm Thread: M8 Double function blinker / parking light Dimensions: L: 50 mm H: 21 mm W: 17 mm ECE-approved Pair priceCable assignment:(BL)Black=ground, (BL)Yellow=Plus (SL)white=plusNote: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

LED indicators Sliver smokeLED mini turn signalM812 Volt 1 WattLength 51 mm Width 23 mm Height 25 mmECE-approvedPair priceNote: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

As the name suggests, extremely small mini indicators NANO, with tinted glass 12V - 0.6W 6 LED M8 only approved for rear Dimensions: L= 23 mm x W=13 mm x H=15 mm Length including arm: 40 mmNote: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

Reflector; reflector red, rectangular with the dimensions: 90 x 25 mm, self-adhesive, ECE-testedNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.