T-Line products

Lateral self-adhesive fork reflector yellow90x24x8 mmECE approvedMandatory for Euro4 vehiclesFor mounting on the forkPrice per pieceNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Cover caps e.g. for M10 mirror thread. Black plastic.Note: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Taillight for Kawasaki Ninja Z650 | Z900 | Ninja 650 | Z-H2 tintedTaillight dark tintedoriginal connectionECE approved

Adapter cable for Honda e.g. CB650F CBR650 MSX125 with indicator and parking light.

Reflector with edge Colour redDiameter 60 x H 10 MM ECE tested M6 boltNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Motorcycle handlebar grips, glossy rubber grips. Open-ended for 22mm handlebars. Length: 125 mm. Note: This product is not specific to any particular vehicle—please check to see if this item fits and/or is needed.

Motorcycle handlebar grips, glossy rubber grips. Open-ended design for 22mm handlebars. Length: 125 mm. Note: This product is not specific to any particular vehicle—please check to see if this item fits and/or is needed.

Motorcycle handlebar grips, glossy rubber grips. Open-ended for 22mm handlebars. Length: 125 mm. Note: This product is not specific to any particular vehicle—please check to see if this item fits and/or is needed.

Motorcycle handlebar grips, Supergrip rubber grips. Open-ended for 22 mm handlebars. Length: 130 mm. Note: This product is not specific to any particular vehicle—please check to see if this item fits and/or is needed.

Number plate screw set M6x20 1 set= 6 pieces galvanized with white capsNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Flasher relay load independent 4 pole for Honda models. Microprocessor controlled flasher module (flasher relay) stabilises the flashing frequency 100%. Failure of the hazard warning lights, after installation of accessory indicators is now a thing of the past. Flasher module is already equipped with the original japanese connectors (depending on model). Simple plug in assembly in a few minutes. no soldering, no cutting of wires, no assembly of high power resistors or similar half-hearted solutions.

Adapter cable with built-in resistors 27 Ohm/5 Watt for LED indicators, compensation up to 5 WattNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Power resistor 25 W- 8,2 Ohm with cable pairNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Power resistor 25 W- 6,8 Ohm with cable pairNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Resistor 68 OhmNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Turn signal extension to achieve the legally required distance (180 mm at the rear and 240 mm at the front). The extensions are made of steel. The length is 35 mm. The thread size is 8 mm to 10 mm. Compatible with, for example: the Bolt, Dual, Rush, Slight, Sliver, Stick, etc. turn signals. Note: This product is not specific to any particular vehicle—please check whether this item fits and/or is needed.

Turn Signal Extension:Thread: M10 to M10Length: 37.5 mm Note: This product is not specific to any particular vehicle—please check to see if this item fits and/or is needed.

Mirror arm extension Handlebar extension redM10 x 1.25mm right-hand thread PU=1 piece extension with screw Extension to the outside 4.5 cm Extension 3.5 cmNote: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

Set of 10 screws with rubber nut for fairings for windshields for license plates universal where it looks chic M5 x 15 mm Head diameter 12 mmNote: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

Allen Screw Set, 10-Piece, with Nylon Washers Universal—wherever it looks good M6 x 20 mm Head diameter 15 mm Aluminum Note: This product is not specific to any particular vehicle—please check to see if this item fits and/or is needed.

Angle valves angled 90 degrees, diameter 8.3 mm, pair priceThe 11.3 mm valves fit most standard rims. 8.3 mm are mostly used for accessory rims.Note: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

Angle valves angled 90 degrees, diameter 11.3 mm, pair priceThe 11.3 mm valves fit most standard rims. 8.3 mm are mostly used for accessory rims.Note: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

Rubber cover for the nut e.g. on indicators. The size is M8. Looks better. The set contains 4 pieces.Note: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

Thanks to the Acebikes belt loops you can decide for yourself at which point of the bike you want to fix your bike. Whether on the motorcycle fork or on the luggage rack, the sturdy belt loops can be attached anywhere. You avoid unattractive damage to your motorcycle when using these belts. This makes the loop set perfect for transporting your bike and solves all fastening problems. Thanks to the use of extremely stable and high-quality materials, the belt loops are resilient and very durable. The set offers perfect transport safety through highest quality. Special features: Creates fixation possibilities wherever you want it Durable and extremely strong material Prevents damage during fixation Convenient to apply and easy to handleNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Taillight for Honda CBR1000RR (2017-2020) tintedTaillight dark tinted original connection ECE-approved

Flasher adapter cable with resistor 27 Ohm / 3 Watt for various Honda to connect accessory flashers to the original wiring harness.Price per pair = 2 pcs.Attention: on some models the adapter cables only fit at the front or rear. The adapter cables do not fit if there are position lights in the original turn signals.Please check yourself before purchase

Blinker adapter cable with resistor 27 Ohm - 3 Watt for various Kawasaki with original turn signal with bulb (not LED) to ensure the connection of accessory indicators to the original wiring harness.Price per pair = 2 pcsAttention: on some models the adapter cables only fit at the front or rear. The adapter cables will not fit if there are position lights in the original turn signals.Please check yourself before purchase.

Impact wrench set Mini7-partPH1 / PH2 x 50/75 mmSlot 4 and 6 x 50 mmNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Reflector with edge and holderColour red Dimensions: 125 x 18 x 9 mmBolt M5ECE testedNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Cover and bend protection made of rubber for mounting e.g. on the indicator and tail light cable. price per piece.Note: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Taillight for Suzuki GSX-R1000 | GSX-R1000R (2017-2022) tintedTaillight dark tinted original connection ECE-approved

Chaser SMD indicators with E-mark for front and rear with metal housing in black. tinted glass Rubber mounted new sequential flashing technology (double row) Cable length 35cm Total length: 65 mm Dimensions: L 58 x D 16 x H 16 mm Connection: M1012V/4WPairNote: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

Brake fluid hose with 2 x 12 mm hose clampsBlackLength: 25 cm Inner diameter 7 mmOuter diameter 12 mmConnection from brake cylinder to fluid reservoirFor brake fluid DOT 4 and DOT 5.1not suitable for silicone brake fluidNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

The bulb socket can be inserted into the original bulb socket, e.g: Honda: VTR 1000 F 98-CB 600 03-05CB 900 02-05CBR 600 F 99-05CBR 600 FS 01-02CBR 1100 XX 99-05The outgoing cables then fit all accessory rear lights with round connectors with D. 3.5 mm.Yellow = Driving lightRed = Stoplight Black = GroundScope of delivery: 1 pc.

The plug fits to the original rear light plug of the wiring harness e.g..: KAWASAKIZX-6 R 98-02ZR-7 00-01ZX-9R 98-01ZX-12R 00-02ZRX 1100/1200SUZUKI:GSF 600 00-04GSF 1200 01-05GSX-R 600 01-03GSX-R 750 00-03GSX-R 1000 01-02SV 650 99-02TL 1000 S 97-00GSX-R 1300R Hayabusa 98-03GSX 1400YAMAHA: R6 98-00FZS 600 to 03 R1 00-01FZS 1000 FazerXJR 1300 99-The outgoing cables then fit all accessory rear lights with round connectors with D. 3.5 mm CAUTION: The cable assignment may differ for some models!Then simply connect it according to the original:Yellow = Driving lightRed = Stoplight Black = GroundScope of delivery: 1 pc.

SHIN YO Adapter cable for turn signal Suitablefor various Yamaha models Dimensions:Length: 100 mmConnections: Yellow cable= turn signal (|) Blackcable = ground (-) Deliveryincludes: 1 pair

Blinker adapter cable for connection to the original wiring harness, for various Ducati see listPair price = 2 pcs.

Rubber grips handlebar grips Flame 22 mm black-yellow closed 130 mmNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Rubber grips handlebar grips Flame 22 mm black-white closed 130 mmNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Handlebar adapter for mounting of handlebar mirrors e.g. Highsider Hole inner diameter M6 Outside diameter M16 x 1,5AluminiumPair price

Edge LED blinkerLED mini turn signalAluminumTintedM8Length 55 mm Width 16 mm Height 17 mmECE-approvedPair priceblackNote: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

Rhomb LED indicatorsLED mini turn signal Aluminum Tinted M8 Length 59 mm Width 18 mm Height 22 mm ECE-approved Pair price black Note: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

Spare expansion screws made of PVC, 6 mm, black, 10 pieces Dimensions: L: 20.5 mm X B: 12 mm, Ø 3.5 - 5 mmNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Running light LED blinker TITAN with sequential running effect with E-mark for front and rear Aluminum housing color black. tinted glass Rubber mounted new sequential flashing technology Dimensions: L 85 x D 18.4 x H 15 mm Connection: M8 Pair Note: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

Running light LED blinker FLOW with sequential running effect with E-mark for front and rear Aluminum housing color black. tinted glass Rubber mounted new sequential flashing technology Dimensions: L 77 x D 13 x H 14 mm Connection: M8 Pair Note: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

Adapter cable for connecting the license plate light to Suzuki modelsNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Lateral self-adhesive fork reflector yellow85x31x13 mmECE approvedMandatory for Euro4 vehiclesFor mounting on the forkself-adhesivePrice per pieceNote: This product is not assigned to a specific vehicle - Please check if this item fits and/or is needed.

Adapter cable rear light with plug for KTM 690 SMC-R4 cables with Japan round plug female

Adapter cable for connecting the license plate light on Kawasaki and Yamaha models with Sumitomo plugNote: This product is not assigned to a specific vehicle - Please check if this item fits and/or is needed.

Reflector housing with a diameter of up to 50 mmRoundedDimensions: L 90 x W 24 x H 8 mmself-adhesiveAdhesive surface curvedColour: redECE-approvedPrice per pieceNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Reflector with edge Colour red Dimensions: 94 x 27,5 x 9 mm ECE tested 2 x M5 boltsNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Self-adhesive reflector with edgeColor redDimensions: 125 x 18 x 9 mmECE testedNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Self-adhesive reflector with edgeColor redDimensions: 100 x 13 x 7 mmECE testedNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Self-adhesive reflector with edge Yellow colour Dimensions: 90 x 25 mm ECE testedNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Reflector without edge Yellow colour Dimensions: 96 x 24 x 8 mm ECE tested M5 BoltNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Self-adhesive reflector without edge Yellow colour Dimensions: 96 x 24 x 8 mm ECE testedNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Reflector with edge Yellow colour Dimensions: 102,5 x 15,3 x 6,7 mm ECE tested Note: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Reflector with edge Yellow colour Dimensions: 102,5 x 15,3 x 6,7 mm ECE testedM5 BoltNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Flasher relay Flasher relay Relay 2 pole load independent max. 10W, only if 4 LED indicators are installed! Does not work with hazard warning lights!

Adapter cable tail light with plug for KTM 790 | 890 Duke 3 cables with Japan round plug female

Adapter cable for connecting the license plate light on older Kawasaki models with Japan block connector.Note: This product is not assigned to a specific vehicle - Please check if this item fits and/or is needed.

Product description:Housing black/blacktintedM8Cable length: 36cmAluminumDimensions: Ø 19.5 x D 31 mmDimensions: Length complete with thread 49 mmExtras: replaceable coverE-testedCable assignment:(BL) Black=ground(BL) Yellow=plusNote: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

Brake fluid hoseBlack Length: 1 m Inner diameter 7 mm Outer diameter 12 mm Connection from brake cylinder to fluid reservoir For brake fluid DOT 4 and DOT 5.1 not suitable for silicone brake fluidNote: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Handlebar end mirrors including handlebar weights black for handlebar end mirrors for Yamaha with M16x1.5 Check beforebuying if the mirrors fit to your car!Delivery : 1 pair

Running light SMD indicators with E-mark for front and rear in the color black. tinted glass Dimensions: L 75 x D 27.5 x H 21 mm PairM10Material: ABSNote: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

Turn signal adapter cable for Kawasaki with original LED indicators to ensure the connection of accessory indicators to the original wiring harness.Price per pair = 2 pcsAttention: on some models the adapter cables only fit at the front or rear. The adapter cables will not fit if there are position lights in the original turn signals.Please check yourself before purchase.

Tail light for Honda CB650R | CBR650R (2020-2023)The LED taillights correspond in form and function to the original LED taillight and are simply mounted on the original bracket in exchange.E-approvalcomplete unitSmoke gray tinted lensBrake and driving light function

Taillight for Honda CB1000R (2018-2021)The LED tail lights correspond in form and function to the original LED tail light and are simply mounted in exchange to the original bracket.E-approvalcomplete unitSmoke grey tinted lensBrake and driving light function

Taillight for Kawasaki Z900RS Z900RS Cafe (2018-2026)The LED tail lights correspond in form and function to the original LED tail light and are simply mounted in exchange to the original bracket.E-approvalcomplete unitSmoke grey tinted lensBrake and driving light function

Adapter cable for connecting the license plate light to various KTM models.Note: This product is not assigned to a specific vehicle - Please check if this item fits and/or is needed.

Adapter cable for connecting the license plate light

Adapter cable for connecting the license plate light

Adapter cable for connecting the license plate light

Cover made of rubber for the nut e.g. on turn signals. The size is M8. Looks better. 4 pieces are supplied in the set.Note: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.

Turn signal adapter cable for Honda CB125R | CB300R | CB650R | CB1000R (2018-2020)front turn signals only!Pair price = 2 pcs

Racing brake disc suitable for Aprilia RSV4 year from (2009-2020)The brake disc is made of high-strength steel and precision ground. Weight approx. 500 g.ABS sensor ring can be used as original.

Racing brake disc suitable for Yamaha R1 (2004-2024) R6 (2006-2024)The brake disc is made of high-strength steel and precision ground. Weight approx. 480 g.ABS sensor ring can be used as original.

Racing brake disc suitable for Kawasaki ZX10R | ZX6R (2004-2026)The brake disc is made of high-strength steel and precision ground. Weight approx. 480 g.ABS sensor ring can be used as original.

Racing brake disc suitable for Suzuki GSXR1000 (2017-2022)The brake disc is made of high-strength steel and precision ground. Weight approx. 485 g.ABS sensor ring can be used as original.

Racing brake disc suitable for Suzuki GSXR1000 | GSXR600 | GSXR750 (2000-2016)The brake disc is made of high-strength steel and precision ground. Weight approx. 530 g.ABS sensor ring can be used as original.

Racing brake disc suitable for Triumph Daytona 675 (2013-2018)The brake disc is made of high-strength steel and precision ground.

Adapter cable for the connection of the license plate illumination

Reflector with edgeColor redDimensions: 90 x 35 x 9 mmECE approvedM5 bolt with locking pointNote: This product is not assigned to a specific vehicle - Please check if this item fits and/or is needed.

Tail light for Yamaha MT-07 (2018-2022) tintedTail light dark tintedoriginal connectionECE approved

Tail light/stop light/indicator combination HeatPairtintedblackDimensions: L 61 mm x W 13 mmSMD 12V | 0,12WM8Rubber armECE-approvedNote: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

Nado COB blinker with rear light and brake lightPairtintedAluminumblackWidth approx. 60 mm without threadM8Rubber armECE-approvedNote: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

SMD blinker HeatPairtintedblackDimensions: L 61 mm x W 13 mmM8SMD 12V / 1WRubber armECE-approvedNote: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

Adapter cable for connecting the license plate light

SMD blinker PIKEPairtintedblackDimensions: L 46 x W 11 x H 19.5 mmTotal length: 66 mmM8Rubber armECE-approvedNote: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

Running light LED indicators with E-mark for front and rear in black.lightly tinted glassPairM8Total length: 104.7 mmNote: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

SMD blinker | rear lightblacktintedThread: M10Dimensions: L: 75 mm H: 21 mm W: 27.5 mmECE-approvedPair priceNote: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

SMD indicators VISIONPairtintedblackDimensions: L 24 x W 11 x H 12.5 mmM6Rubber armECE-approvedNote: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

Rear brake disc Racing for Ducati Panigale | V4 | Multistrada | Monster | SupersportThe brake disc is made of high-strength steel and precision ground. Weight approx. 600 g.ABS sensor ring can be used as original.

Wind protection thermal covers Windstopper for tire warmersFinally no more cold tires. Even with good tire warmers, in cold, strong wind and / or rain, the covers protect.Size is universal for 17 inch. Attachment with Velcro. The set is for front and rear wheel.Note: This product is not assigned to a specific vehicle - Please check if this item fits and / or is needed.

SMD license plate light FlatWidth: 59 mmHeight: 20 mmDepth: 29 mmScrew distance: 44 mm / length 17 mmM4ECE-approved

Blinker adapter cable for connection to the original wiring harness see models Pair price = 2 pcs.