FREE SHIPPING FROM € 150,- order value in Germany
schneller Versand
sichere Zahlungssysteme
Service 07473-9533353
Filter
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!
Universal
Universal
Rubber cover for indicators with M8 nut
Rubber cover for indicators with M8 nut
6.95€ *

Ready to ship today

Universal
Rubber cover for indicators with M8 nut
Rubber cover for indicators with M8 nut
9.95€ *

Ready to ship today

Universal
Turn signal extension Length 37.5 mm
Turn signal extension Length 37.5 mm
19.95€ *

Ready to ship today

Universal
Turn signal holder 6 for IQ1 and IQ4
Turn signal holder 6 for IQ1 and IQ4
24.95€ *

Ready to ship today

Motorcycle Turn Signal Spacing Extensions

For many bikers, their motorcycle is more than just a vehicle to get from point A to point B. It's a symbol of independence. It often stands for independence, symbolizes freedom and spices it all up with a touch of wildness. If you want toindividualize yourstandard motorcycle, you will find a wide range of products in the TecBike Online Shop

  • Turn signal extensions,
  • Turn signal adapters and
  • Turn signal holders

for front, rear and for almost all common motorcycles.

Turn signal spacing on the motorcycle: What is allowed?

As with cars,turn signals on motorcycles are also subject to strict regulations. The exact regulations can be found in the Road Traffic Licensing Regulations (StVZO). In addition, in 1998 there was a changeover to EC law for two-wheelers.

In both regulations, the turn signal distance is decisive for the motorcycle. The turn signal distance must be observed, as must the distance to the headlight at the front and the distance to the tail light at the rear.

Which turn signal distance applies according to StVZO?

If the Road Traffic Licensing Regulations (StVZO) are decisive, the following turn signal distances are prescribed for motorcycles:

  • Distance front: at least 340 millimeters
  • Distance at the rear: at least 240 millimeters

EC law requires 240 millimeters at the front and 180 millimeters at the rear. Turn signals may be mounted at a height of at least 350 millimeters up to a maximum of 1,200 millimeters.

Turn signal bracket and turn signal extension for your motorcycle

You have decided to convert your turn signals according to the legal requirements? In our TecBike Online Shop you will find everything you need for the work. Does the thread of your new turn signals does not match the old? A turn signal adapter is a safe and simple solution here: So you can reduce an M8 thread to M5 without effort.

If you need a larger thread, this is possible with a turn signal extension M8 to M10. The high-quality turn signal extension M8 to M10 is made of robust and durable steel. In the TecBike range you can choose between lengths of 25 or 35 millimeters. So you can easily and stylishly maintain the required turn signal distance on the motorcycle at both positions.

Extend the turn signal cable if required

By changing the turn signal distance through a turn signal holder, it may be that the original cables of the turn signals are now too short. Even for this case, we have the right products for you in our range. With a ready-made extension cable, the actual turn signal cable can be extended. These cables are equipped with the rightplugs for yourmotorcycle and are simply connected to the existing lines.

Important: If you want to extend the turn signal cable, use an additional extension cable instead of "patching" a piece of cable. So you are on the safe side that after the conversion everything works correctly.

From the turn signal extension to the turn signal adapter

The TecBike online range offers you a wide selection of high-quality mounting and spare parts. Our durable turn signal extensions and turn signal holders are not only extremely robust, they also look good and fit harmoniously into the design of your machine. You have questions about our products? We will be happy to advise you!

Motorcycle Turn Signal Spacing Extensions For many bikers, their motorcycle is more than just a vehicle to get from point A to point B. It's a symbol of independence. It often stands for... read more »
Close window

Motorcycle Turn Signal Spacing Extensions

For many bikers, their motorcycle is more than just a vehicle to get from point A to point B. It's a symbol of independence. It often stands for independence, symbolizes freedom and spices it all up with a touch of wildness. If you want toindividualize yourstandard motorcycle, you will find a wide range of products in the TecBike Online Shop

  • Turn signal extensions,
  • Turn signal adapters and
  • Turn signal holders

for front, rear and for almost all common motorcycles.

Turn signal spacing on the motorcycle: What is allowed?

As with cars,turn signals on motorcycles are also subject to strict regulations. The exact regulations can be found in the Road Traffic Licensing Regulations (StVZO). In addition, in 1998 there was a changeover to EC law for two-wheelers.

In both regulations, the turn signal distance is decisive for the motorcycle. The turn signal distance must be observed, as must the distance to the headlight at the front and the distance to the tail light at the rear.

Which turn signal distance applies according to StVZO?

If the Road Traffic Licensing Regulations (StVZO) are decisive, the following turn signal distances are prescribed for motorcycles:

  • Distance front: at least 340 millimeters
  • Distance at the rear: at least 240 millimeters

EC law requires 240 millimeters at the front and 180 millimeters at the rear. Turn signals may be mounted at a height of at least 350 millimeters up to a maximum of 1,200 millimeters.

Turn signal bracket and turn signal extension for your motorcycle

You have decided to convert your turn signals according to the legal requirements? In our TecBike Online Shop you will find everything you need for the work. Does the thread of your new turn signals does not match the old? A turn signal adapter is a safe and simple solution here: So you can reduce an M8 thread to M5 without effort.

If you need a larger thread, this is possible with a turn signal extension M8 to M10. The high-quality turn signal extension M8 to M10 is made of robust and durable steel. In the TecBike range you can choose between lengths of 25 or 35 millimeters. So you can easily and stylishly maintain the required turn signal distance on the motorcycle at both positions.

Extend the turn signal cable if required

By changing the turn signal distance through a turn signal holder, it may be that the original cables of the turn signals are now too short. Even for this case, we have the right products for you in our range. With a ready-made extension cable, the actual turn signal cable can be extended. These cables are equipped with the rightplugs for yourmotorcycle and are simply connected to the existing lines.

Important: If you want to extend the turn signal cable, use an additional extension cable instead of "patching" a piece of cable. So you are on the safe side that after the conversion everything works correctly.

From the turn signal extension to the turn signal adapter

The TecBike online range offers you a wide selection of high-quality mounting and spare parts. Our durable turn signal extensions and turn signal holders are not only extremely robust, they also look good and fit harmoniously into the design of your machine. You have questions about our products? We will be happy to advise you!

Viewed