Kostenloser Versand ab € 150,- Bestellwert Inland
schneller Versand
sichere Zahlungssysteme
Service 07473-9533353
Filter
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!
Universal
3M adhesive tape set 10 pieces
3M adhesive tape set 10 pieces
3M adhesive strips self-adhesive, set of 10 pieces, thickness:1 mm width:10 mm length 60 mm Note: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.
9.70€ *

Ready to ship today

NEW
Adapter cable for license plate light Ducati | Husqvarna | KTM |
Adapter cable for license plate light Ducati | Husqvarna | KTM |
Adapter cable for connecting the license plate light
4.83€ *

Ready to ship today

Adapter cable for license plate light Ducati | Husqvarna | Suzuki | Yamaha
Adapter cable for license plate light Ducati | Husqvarna | Suzuki | Yamaha
Adapter cable for the connection of the license plate light e.g. on: t Ducati Monster t Ducati scrambler t Ducati Panigals t Ducati Diavel t Husqvarna 401/701 t Suzuki GSXR/S 125 t Suzuki GSX-R1000/R t Suzuki GSX-S 1000 S Katana t Yamaha...
8.72€ * 8.95€ *

Ready to ship today

Adapter cable for license plate light for Kawasaki new
Adapter cable for license plate light for Kawasaki new
Adapter cable for connecting the license plate light to new Kawasaki models Note: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.
4.83€ * 4.95€ *

Ready to ship today

Adapter cable for license plate light for Kawasaki old
Adapter cable for license plate light for Kawasaki old
Adapter cable for connecting the license plate light to older Kawasaki models. Note: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.
4.83€ * 4.95€ *

Ready to ship today

Adapter cable for license plate light for Suzuki
Adapter cable for license plate light for Suzuki
Adapter cable for connecting the license plate light to Suzuki models Note: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.
2.88€ *

Ready to ship today

NEW
Adapter cable for license plate light for various KTM models
Adapter cable for license plate light for various KTM models
Adapter cable for connecting the license plate light to various KTM models. Note: This product is not assigned to a specific vehicle - Please check if this item fits and/or is needed.
4.83€ *

Ready to ship today

NEW
Adapter cable for license plate light Honda
Adapter cable for license plate light Honda
Adapter cable for connecting the license plate light
2.53€ *

Ready to ship today

NEW
Adapter cable for license plate light Yamaha
Adapter cable for license plate light Yamaha
Adapter cable for connecting the license plate light
4.83€ *

Ready to ship today

LED license plate light
LED license plate light
R&G license plate light. ECE approved. Screw distance 27 mm
16.47€ *

Ready to ship today

License plate illumination LED Titan
License plate illumination LED Titan
LED license plate illumination titanium Aluminium black Dimensions: W 43.5 x H 11 x D 22 mm ECE-approved
19.45€ *

Ready to ship today

License plate light LED
License plate light LED
LED license plate light retractable E-sign Mounting material
27.25€ * 29.95€ *

Ready to ship today

License plate light LED black
License plate light LED black
LED number plate illumination black case Dimensions: Height 13 mm, width 47 mm, depth 20 mm ECE-approved
15.55€ *

Ready to ship today

Universal
License plate light LED Flex with adhesive strip
License plate light LED Flex with adhesive strip
LED license plate light Flex. Flexible flexible self-adhesive housing with 4 LED s 62 mm long 6 mm high 13.5 mm wide Cable length 580 mm ECE-tested Note: This product is not assigned to a specific vehicle - please check if this item fits...
11.65€ *

Ready to ship today

Universal
License plate light miniLED
License plate light miniLED
LED Mini license plate light Top quality strong luminosity ECE-approved no TÜV-registration necessary 43 x 7 x 12 mm Note: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.
10.67€ * 10.95€ *

Ready to ship today

Universal
License plate light set IQ1 for holder IQ
License plate light set IQ1 for holder IQ
License plate light set for IQ1 license plate holders from PerfectParts. LED mini license plate light including holder and mounting material. strong luminosity ECE-tested no TÜV-registration necessary. Note: This product is not assigned...
15.06€ * 15.45€ *

Ready to ship today

Universal
License plate light set IQ4 for holder IQ
License plate light set IQ4 for holder IQ
License plate light set with LED mini license plate light and reflector 100x13 mm for IQ license plate holders from PerfectParts. Note: This product is not assigned to a specific vehicle - please check if this item fits and/or is needed.
24.32€ * 24.95€ *

Ready to ship today

License plate light SMD Byte
License plate light SMD Byte
SMD license plate light Byte Dimensions: H 30 x Ø 13 mm M6 black aluminium ECE-tested Cable length 116mm
14.57€ *

Ready to ship today

License plate light SMD Flat
License plate light SMD Flat
SMD license plate light Flat Width: 59 mm Height: 20 mm Depth: 29 mm Screw distance: 44 mm / length 17 mm M4 ECE-approved
14.57€ * 14.95€ *

Ready to ship today

LED license plate light for screw-on and & self-adhesive

License plate lights are an indispensable part of the mandatory equipment on motorcycles. A stylistic element has long since developed from this. With a license plate light from your TECBike shop you not only meet the legal requirements, you can also give your bike an individual touch.

Modern license plate illumination for your bike - are light emitting diodes allowed?

Anyone who wants to take part in road traffic with his or her two-wheeler and ride it safely must comply with the legal requirements. Only if a motorcycle has the lighting prescribed by the STVzo will it receive a TÜV badge. A prerequisite for this is of course that all other relevant areas also comply with the regulations. The lighting also includes the lights for license plates. Bicycles with auxiliary motors, wheelchairs with electric motors and mopeds are excluded from this regulation according to the STVzo.

In order to illuminate the number plate correctly, it is not sufficient to simply fit a rear light above the registration plate. As a rule, it is not capable of shining down on the license plate. The situation is different if the manufacturer has integrated an approved and type-approved license plate light. On these models, there is a clear and transparent surface in the lower part of the rear lamp. This transparent part allows the light of the light sources to shine onto the license plate.

In order to avoid dazzling the following traffic, it is only allowed to illuminate the license plate itself. The regulations also stipulate that if the headlights and reflectors are switched on for driving, the license plate illumination must also be in operation. In the meantime you have a free choice of lights. According to your personal taste and the style of your bike, you can install lighting with classic bulbs, xenon light or LED lights. It is important that the bulbs are not coloured, for example red or blue.

The minimum or maximum height of the lighting is determined by the specifications on how the license plate is to be mounted. The distance of the lower edge to the ground must be at least 30 cm. The maximum height is 120 cm. The regulations also stipulate that installation may only take place at a maximum angle of up to 30 degrees.

The advantages of modern LED lamps on the bike

In our shop we have LED license plate lights, which you can use universally and independent of the brand. The selection ranges from slim mini LEDs to complete lights. You are missing the right accessories for the mounting? We offer you a versatile selection and the right tools.

The lighting plays an important role not only in the dark season. It ensures that you are seen and noticed by other road users from the front and the back.

In recent years, modern LED technology has conquered all areas of life. This also applies to two and four-wheeled vehicles. The advantages of these components are obvious. Compared to conventional lamps, they require considerably less power. Temperature fluctuations or vibrations can do little harm to them. This minimises the risk of the lighting system failing. The weight and the small space requirement are also factors that should not be neglected. Here again, a comparison with the conventional bulb is worthwhile. Light-emitting diodes, or LEDs for short, only require a fraction of the space required by the bulb and thus allow very compact and discreet designs that can be harmoniously integrated into both classic bikes and ultra-modern designs. If required, LEDs can even be "hidden" so that they are only visible at second glance. An excellent example of this is our bar end indicators.

The installation of our license plate light can be done by yourself without any previous knowledge. Only two cables are needed for the connection. For the mounting you have the choice

  • stick or
  • screw or
  • gluing and screwing


would like. When using screws, please always make sure that there is a sufficient screw distance to the article. Our license plate light with LED technology is of course ECE tested.

The suitable accessories for an easy mounting

Usually the required mounting and cable material is included in the scope of delivery. However, the market offers many different types of motorcycles, all of which have their own specific requirements. So that nothing stands in the way of an assembly, you can get numerous accessories from us in addition to the actual and often universally usable license plate lights and illuminants. The selection ranges from adapter cables to strongly adhesive adhesive strips.

LED license plate light for screw-on and & self-adhesive License plate lights are an indispensable part of the mandatory equipment on motorcycles . A stylistic element has long since... read more »
Close window

LED license plate light for screw-on and & self-adhesive

License plate lights are an indispensable part of the mandatory equipment on motorcycles. A stylistic element has long since developed from this. With a license plate light from your TECBike shop you not only meet the legal requirements, you can also give your bike an individual touch.

Modern license plate illumination for your bike - are light emitting diodes allowed?

Anyone who wants to take part in road traffic with his or her two-wheeler and ride it safely must comply with the legal requirements. Only if a motorcycle has the lighting prescribed by the STVzo will it receive a TÜV badge. A prerequisite for this is of course that all other relevant areas also comply with the regulations. The lighting also includes the lights for license plates. Bicycles with auxiliary motors, wheelchairs with electric motors and mopeds are excluded from this regulation according to the STVzo.

In order to illuminate the number plate correctly, it is not sufficient to simply fit a rear light above the registration plate. As a rule, it is not capable of shining down on the license plate. The situation is different if the manufacturer has integrated an approved and type-approved license plate light. On these models, there is a clear and transparent surface in the lower part of the rear lamp. This transparent part allows the light of the light sources to shine onto the license plate.

In order to avoid dazzling the following traffic, it is only allowed to illuminate the license plate itself. The regulations also stipulate that if the headlights and reflectors are switched on for driving, the license plate illumination must also be in operation. In the meantime you have a free choice of lights. According to your personal taste and the style of your bike, you can install lighting with classic bulbs, xenon light or LED lights. It is important that the bulbs are not coloured, for example red or blue.

The minimum or maximum height of the lighting is determined by the specifications on how the license plate is to be mounted. The distance of the lower edge to the ground must be at least 30 cm. The maximum height is 120 cm. The regulations also stipulate that installation may only take place at a maximum angle of up to 30 degrees.

The advantages of modern LED lamps on the bike

In our shop we have LED license plate lights, which you can use universally and independent of the brand. The selection ranges from slim mini LEDs to complete lights. You are missing the right accessories for the mounting? We offer you a versatile selection and the right tools.

The lighting plays an important role not only in the dark season. It ensures that you are seen and noticed by other road users from the front and the back.

In recent years, modern LED technology has conquered all areas of life. This also applies to two and four-wheeled vehicles. The advantages of these components are obvious. Compared to conventional lamps, they require considerably less power. Temperature fluctuations or vibrations can do little harm to them. This minimises the risk of the lighting system failing. The weight and the small space requirement are also factors that should not be neglected. Here again, a comparison with the conventional bulb is worthwhile. Light-emitting diodes, or LEDs for short, only require a fraction of the space required by the bulb and thus allow very compact and discreet designs that can be harmoniously integrated into both classic bikes and ultra-modern designs. If required, LEDs can even be "hidden" so that they are only visible at second glance. An excellent example of this is our bar end indicators.

The installation of our license plate light can be done by yourself without any previous knowledge. Only two cables are needed for the connection. For the mounting you have the choice

  • stick or
  • screw or
  • gluing and screwing


would like. When using screws, please always make sure that there is a sufficient screw distance to the article. Our license plate light with LED technology is of course ECE tested.

The suitable accessories for an easy mounting

Usually the required mounting and cable material is included in the scope of delivery. However, the market offers many different types of motorcycles, all of which have their own specific requirements. So that nothing stands in the way of an assembly, you can get numerous accessories from us in addition to the actual and often universally usable license plate lights and illuminants. The selection ranges from adapter cables to strongly adhesive adhesive strips.

Viewed