FREE SHIPPING FROM € 150,- order value in Germany
schneller Versand
sichere Zahlungssysteme
Service 07473-9533353
Filter
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 9
No results were found for the filter!
Hint!
1 From 9

Motorcycle license plate holder in a large selection

It is intended to hold the number plate securely and thus prevent it from coming off by itself while driving. We're talking about the license plate holder for your motorcycle. In our Online-Shop you can get holders for motorcycle license plates for common bike brands like

  • Aprilia
  • Ducati
  • Honda
  • Suzuki
  • Kawasaki
  • Yamaha
  • KTM
  • among other things

Buying a motorcycle license plate holder - an annoying must or a design element?

As a vehicle owner, you are obliged to affix license plates to your bike or car. Usually a license plate holder is already available from the factory. However, if you want to give your bike an individual look or attach the number plate in another place, for example on the side, you can use the number plate holders from our shop.

Of course we would like to drive around without the annoying "cake plates". On the other hand, we also don't want to get into conflict with the law. Therefore, the number plate must be attached to the well-shaped flip side of your machine. But some serial mounts remind you of a failed design attempt and are rather disturbing than fitting harmoniously into the overall picture. With us you get from sporty to custom license plate holders from

  • DPM Depretto Moto
  • Evotech
  • lightech
  • PerfectParts and
  • RG Racing and Valtermoto

What makes a good license plate holder for the motorcycle?

If you are looking for a new holder for the license plate, there are several aspects that should be considered when deciding on a purchase. One important criterion is the material the holder is made of. The legal requirements in Germany, compared to other countries, offer little freedom when it comes to the design and attachment of license plates. Own designs or mottos on the metal plates are not only undesirable in this country, they are also prohibited. Just like the license plate for a car, the motorcycle license plate is also issued by the responsible registration office and there are rigid guidelines regarding size and appearance. Which product is the ideal one for you therefore depends, among other things, on the size of your license plate

Until the beginning of 2011, the size of the number plates caused displeasure among numerous bikers. In their eyes it was too big, so it fitted anything but harmoniously into the bike design. Although they are now smaller, there is still a lack of popularity for the plate. Nevertheless, we can't do without them and the corresponding license plate holder.

Since 2011 license plates are available in different sizes. They are available in the dimensions 18 x 20, 20 x 20 and 22 x 20 cm at the issuing offices. As for the size and appearance of the license plate, the legislator has also issued fixed specifications for the attachment of the unloved parts. The maximum angle to the vertical must not exceed 30°. For the angle to the ground, a range between 60° and 90° is permissible. If you want to affix your motorcycle license plate to the side, it must be clearly visible/readable from a 30° angle behind the machine. Furthermore, the plate must be illuminated regardless of its mounting location. There are also corresponding specifications for this. If this lighting is missing, problems with the TÜV approval are preprogrammed. Power-saving and long-life LEDs are increasingly being used for lighting. They can be integrated space-saving and almost invisible. Furthermore they are insensitive to the vibrations of the motorcycle. They are available in tinted or clear versions.

Chic design object in different versions

Our license plate holders are available with and without tail light. All models are characterized by high quality and careful workmanship. Furthermore, the holders convince with an easy mounting. To ensure a long life and maximum durability, only high-quality materials such as stainless steel or aluminium are used. A high-quality powder coating protects the metal from the effects of the weather and effectively prevents corrosion. In addition to the actual holder, the scope of delivery also includes a reflector with licence plate light and the necessary mounting material. Acceptance by the TÜV or an ABE are just as little necessary as an entry in the papers.

Usually, the holders are frameless and in a discreet black. The no-frills license plate frames even round off the appearance of existing chrome attachments.

Tips for a successful mounting of the license plate holder

To mount a license plate holder, all you need are suitable tools and a little craftsmanship. The license plate holder from our shop can usually be mounted without cutting into fairing parts.

Before you start the conversion work, it is important to read the instructions thoroughly. While a four-wheeled vehicle can stand on its own, this is not the case with a two-wheeled vehicle. It is therefore important to ensure that the bike stands safely and firmly. A mounting stand from our shop makes your work easier and reliably prevents your bike from falling over.

Basically, all parts and screws must be checked for a tight fit. Furthermore, a test must be carried out to ensure sufficient freedom of movement, tightness and function in unloaded and loaded condition. In order to prevent screws from loosening by themselves, you have to fasten them with a suitable threadlocking agent. We recommend that this work is not carried out until you have completely assembled the holder.

Give your bike a very special look with a license plate holder from the TecBike-Shop!

Motorcycle license plate holder in a large selection It is intended to hold the number plate securely and thus prevent it from coming off by itself while driving. We're talking about the... read more »
Close window

Motorcycle license plate holder in a large selection

It is intended to hold the number plate securely and thus prevent it from coming off by itself while driving. We're talking about the license plate holder for your motorcycle. In our Online-Shop you can get holders for motorcycle license plates for common bike brands like

  • Aprilia
  • Ducati
  • Honda
  • Suzuki
  • Kawasaki
  • Yamaha
  • KTM
  • among other things

Buying a motorcycle license plate holder - an annoying must or a design element?

As a vehicle owner, you are obliged to affix license plates to your bike or car. Usually a license plate holder is already available from the factory. However, if you want to give your bike an individual look or attach the number plate in another place, for example on the side, you can use the number plate holders from our shop.

Of course we would like to drive around without the annoying "cake plates". On the other hand, we also don't want to get into conflict with the law. Therefore, the number plate must be attached to the well-shaped flip side of your machine. But some serial mounts remind you of a failed design attempt and are rather disturbing than fitting harmoniously into the overall picture. With us you get from sporty to custom license plate holders from

  • DPM Depretto Moto
  • Evotech
  • lightech
  • PerfectParts and
  • RG Racing and Valtermoto

What makes a good license plate holder for the motorcycle?

If you are looking for a new holder for the license plate, there are several aspects that should be considered when deciding on a purchase. One important criterion is the material the holder is made of. The legal requirements in Germany, compared to other countries, offer little freedom when it comes to the design and attachment of license plates. Own designs or mottos on the metal plates are not only undesirable in this country, they are also prohibited. Just like the license plate for a car, the motorcycle license plate is also issued by the responsible registration office and there are rigid guidelines regarding size and appearance. Which product is the ideal one for you therefore depends, among other things, on the size of your license plate

Until the beginning of 2011, the size of the number plates caused displeasure among numerous bikers. In their eyes it was too big, so it fitted anything but harmoniously into the bike design. Although they are now smaller, there is still a lack of popularity for the plate. Nevertheless, we can't do without them and the corresponding license plate holder.

Since 2011 license plates are available in different sizes. They are available in the dimensions 18 x 20, 20 x 20 and 22 x 20 cm at the issuing offices. As for the size and appearance of the license plate, the legislator has also issued fixed specifications for the attachment of the unloved parts. The maximum angle to the vertical must not exceed 30°. For the angle to the ground, a range between 60° and 90° is permissible. If you want to affix your motorcycle license plate to the side, it must be clearly visible/readable from a 30° angle behind the machine. Furthermore, the plate must be illuminated regardless of its mounting location. There are also corresponding specifications for this. If this lighting is missing, problems with the TÜV approval are preprogrammed. Power-saving and long-life LEDs are increasingly being used for lighting. They can be integrated space-saving and almost invisible. Furthermore they are insensitive to the vibrations of the motorcycle. They are available in tinted or clear versions.

Chic design object in different versions

Our license plate holders are available with and without tail light. All models are characterized by high quality and careful workmanship. Furthermore, the holders convince with an easy mounting. To ensure a long life and maximum durability, only high-quality materials such as stainless steel or aluminium are used. A high-quality powder coating protects the metal from the effects of the weather and effectively prevents corrosion. In addition to the actual holder, the scope of delivery also includes a reflector with licence plate light and the necessary mounting material. Acceptance by the TÜV or an ABE are just as little necessary as an entry in the papers.

Usually, the holders are frameless and in a discreet black. The no-frills license plate frames even round off the appearance of existing chrome attachments.

Tips for a successful mounting of the license plate holder

To mount a license plate holder, all you need are suitable tools and a little craftsmanship. The license plate holder from our shop can usually be mounted without cutting into fairing parts.

Before you start the conversion work, it is important to read the instructions thoroughly. While a four-wheeled vehicle can stand on its own, this is not the case with a two-wheeled vehicle. It is therefore important to ensure that the bike stands safely and firmly. A mounting stand from our shop makes your work easier and reliably prevents your bike from falling over.

Basically, all parts and screws must be checked for a tight fit. Furthermore, a test must be carried out to ensure sufficient freedom of movement, tightness and function in unloaded and loaded condition. In order to prevent screws from loosening by themselves, you have to fasten them with a suitable threadlocking agent. We recommend that this work is not carried out until you have completely assembled the holder.

Give your bike a very special look with a license plate holder from the TecBike-Shop!

Viewed