RG Racing products

Exhaust bracket set for Honda CBR250R (2011-2016)R&G Exhaust bracket made of aluminium with R&G engraving. The exhaust mounts are of very high quality and have a fine design. The kit also includes the pillion footrest cover, which can be used to close the holes after removing the rear footrests.Scope of delivery: Exhaust bracket + footrest cover

Exhaust bracket set for Kawasaki Z 300 (2015-2016)R&G Exhaust bracket made of aluminium with R&G engraving. The exhaust mounts are of very high quality and have a fine design. The kit also includes the pillion footrest cover, which can be used to close the holes after removing the rear footrests.Scope of delivery: Exhaust bracket + footrest cover

Exhaust bracket set black for BMW R 1200 R (2015-2017)R&G Exhaust bracket made of aluminium with R&G engraving. The exhaust mounts are of very high quality and have a fine design. The kit also includes the pillion footrest cover, which can be used to close the holes after removing the rear footrests.Scope of delivery: Exhaust bracket + footrest cover

Turn signal adapter set front for Honda CBR300R (2014-2018) Turnsignal adapter, allow the use of accessory turn signals. The mostly large original "indicator holes" can be closed with these adapter plates.

Carbon tank protector for Honda CBR500R (2016-2026)The R&G tank protectors protect the tank in the event of a fall. The motorcycle does not fall directly onto the tank, but onto the protector. The design of the protectors prevents the motorcycle from tilting if it slips. The protectors are attached with silicone (included) and can also be removed again. The material is carbon/Kevlar. Anyone who has had to bring a tank in for repair will appreciate these protectors. You can buy a product that not only looks good, but also works and can save you a lot of money in the event of a crash. Scope of delivery: left and right side

Footrest cover for Honda CBR250R (2011-2016)The R&G footrest covers are used when the rear footrests have been removed to close the holes.The scope of delivery is one piece. On the opposite side is the exhaust bracket.

Footrest cover set for Honda Africa Twin CRF 1000 L (2016-)The R&G footrest covers are used when the rear footrests have been removed to close the holes.The scope of delivery includes 2 pieces for left and right.

Footrest cover set for Yamaha Tracer 700 | Tracer 7 The R&G footrest covers are used when the rear footrests have been removed to close the holes. The scope of delivery includes 2 pieces for left and right.

Fork protectors for Yamaha MT-07 Motocage (2014-2017) the fork protectors allow a perfect protection in case of a fall. The fixing screws are recessed and cannot be ground on or off. Scope of delivery: left & right side

Footrest cover for BMW R 1200 R RS (2015-2017)The R&G footrest covers are used when the rear footrests have been removed to close the holes.The scope of delivery is one piece. On the opposite side is the exhaust bracket.

Footrest cover for Honda CBR300R (2014-2018)The R&G footrest covers are used when the rear footrests have been removed to close the holes.The scope of delivery is one piece. On the opposite side is the exhaust bracket.

License plate holder by R&G for BMW F 800 GT (2013-2016) without luggage rackMade of black powder-coated stainless steel, for a perfect look and quality In the scope of supply is a small LED license plate light with E-sign The license plate holder can be used with original turn signals as well as with mini turn signals Great fit and quality Great looks

License plate holder from R&G.Made of black powder-coated stainless steel, for a perfect look and quality In the scope of supply is a small LED license plate light with E-sign The license plate holder can be used with original turn signals as well as with mini turn signals Great fit and quality Great looks

License plate holder from R&G.Made of black powder-coated stainless steel, for a perfect look and quality In the scope of supply is a small LED license plate light with E-sign The license plate holder can be used with original turn signals as well as with mini turn signals Great fit and quality Great looks

License plate holder from R&G.Made of black powder-coated stainless steel, for a perfect look and quality In the scope of supply is a small LED license plate light with E-sign The license plate holder can be used with original turn signals as well as with mini turn signals Great fit and quality Great looks

License plate holder from R&G.Made of black powder-coated stainless steel, for a perfect look and quality In the scope of supply is a small LED license plate light with E-sign The license plate holder can be used with original turn signals as well as with mini turn signals Great fit and quality Great looks

License plate holder from R&G.Made of black powder-coated stainless steel, for a perfect look and quality In the scope of supply is a small LED license plate light with E-sign The license plate holder can be used with original turn signals as well as with mini turn signals Great fit and quality Great looks

License plate holder from R&G.Made of black powder-coated stainless steel, for a perfect look and quality In the scope of supply is a small LED license plate light with E-sign The license plate holder can be used with original turn signals as well as with mini turn signals Great fit and quality Great looks

License plate holder from R&G for Kawasaki Z 125 (2016-2018)Made of black powder-coated stainless steel, for a perfect look and quality In the scope of supply is a small LED license plate light with E-sign The license plate holder can be used with original turn signals as well as with mini turn signals Great fit and quality Great looks

License plate holder from R&G.Made of black powder-coated stainless steel, for a perfect look and quality In the scope of supply is a small LED license plate light with E-sign The license plate holder can be used with original turn signals as well as with mini turn signals Great fit and quality Great looks

License plate holder from R&G.Made of black powder-coated stainless steel, for a perfect look and quality In the scope of supply is a small LED license plate light with E-sign The license plate holder can be used with original turn signals as well as with mini turn signals Great fit and quality Great looks

License plate holder from R&G.Made of black powder-coated stainless steel, for a perfect look and quality In the scope of supply is a small LED license plate light with E-sign The license plate holder can be used with original turn signals as well as with mini turn signals Great fit and quality Great looks

License plate holder from R&G for BMW R NINE T (2014-2022) with MonoSeatMade of black powder coated stainless steel, for a perfect look and quality. Included is a small LED license plate light with E-mark. The license plate holder can be used with both original turn signals and mini turn signals. Great fit and quality Great look Please note: turn signals shown in the pictures are not included.

License plate holder from R&G.Made of black powder-coated stainless steel, for a perfect look and quality In the scope of supply is a small LED license plate light with E-sign The license plate holder can be used with original turn signals as well as with mini turn signals Great fit and quality Great looks

We offer you the new elaborately manufactured license plate holders from R&G for Kawasaki Z 800 (2013-2016) only for original indicators.Made of black powder-coated stainless steel, for a perfect look and quality In the scope of supply is a small LED license plate light with E-sign The license plate holder can only be used with original turn signals Great fit and quality Great looks

License plate holder from R&G.Made of black powder-coated stainless steel, for a perfect look and quality In the scope of supply is a small LED license plate light with E-sign The license plate holder can be used with original turn signals as well as with mini turn signals Great fit and quality Great looks

License plate holder from R&G.Made of black powder-coated stainless steel, for a perfect look and quality In the scope of supply is a small LED license plate light with E-sign The license plate holder can be used with original turn signals as well as with mini turn signals Great fit and quality Great looks

Manifold guard for Honda CBR500R (2016-2018)Stone chips and insects are a danger to the sensitive radiator fins not only on the race track.The manifold grille made of plastic-coated aluminium is the solution to this problem: the perfect protection against stone chips and insects with all the small parts required for installation Mounting: no drilling or similar, mounting material is included in the delivery

Radiator grille water cooler blue for BMW S1000RR (2015-2018)R&G radiator grille made of plastic-coated aluminium is the perfect protection against damage to the radiator and is very easy to install. Drilling or modifications to the vehicle are not necessary. The radiator grille is easy to remove for cleaning.

Radiator grille water cooler dark blue for BMW S1000RR (2015-2018)R&G radiator grille made of plastic-coated aluminium is the perfect protection against damage to the radiator and is very easy to install. Drilling or modifications to the vehicle are not necessary. The radiator grille is easy to remove for cleaning.

Radiator grille water cooler black for Ducati Hypermotard 821 (2013-2016) 939 (2016-2018)R&G radiator grille made of plastic-coated aluminium is the perfect protection against damage to the radiator and is very easy to install. Drilling or modifications to the vehicle are not necessary. The radiator grille is easy to remove for cleaning.

Radiator grille oil cooler black for Ducati Multistrada 950 (2017-2018) 1200 (2015-2016) Enduro (2016-2018)R&G radiator grille made of plastic-coated aluminium is the perfect protection against damage to the radiator and is very easy to install. Drilling or modifications to the vehicle are not necessary. The radiator grille is easy to remove for cleaning.

Radiator grille oil cooler black for Suzuki GSX-R 1000 (2017-2022)R&G radiator grille made of plastic-coated aluminium is the perfect protection against damage to the radiator and is very easy to install. Drilling or modifications to the vehicle are not necessary. The radiator grille is easy to remove for cleaning.

Radiator grille water cooler red for BMW S1000RR (2015-2018)R&G radiator grille made of plastic-coated aluminium is the perfect protection against damage to the radiator and is very easy to install. Drilling or modifications to the vehicle are not necessary. The radiator grille is easy to remove for cleaning.

Radiator grille set water and oil red for Ducati 848 1098 1198R&G radiator grille made of plastic-coated aluminium is the perfect protection against damage to the radiator and is very easy to install. Drilling or modifications to the vehicle are not necessary. The radiator grille is easy to remove for cleaning.

Radiator grille water stainless steel for Kawasaki Versys 650 (2015-2019)Stone chips and insects are a danger for the sensitive radiator fins. Therefore we are pleased to be able to offer you the new radiator grilles made of high-quality stainless steel. This is the perfect protection.The grilles give very good air passage, which is not to be feared an increase of the cooling water temperature. Very nice optics and simple assembly with all small parts necessary for the assembly. The radiator grilles are insensitive to rust and extra strong. Colour SILVER.

Radiator grille water cooler black for BMW R 1200 GS Adventure (2013-2018)R&G radiator grille made of plastic-coated aluminium is the perfect protection against damage to the radiator and is very easy to install. Drilling or modifications to the vehicle are not necessary. The radiator grille is easy to remove for cleaning.

Radiator grille water cooler black for BMW S1000R (2017-2020)R&G radiator grille made of plastic-coated aluminium is the perfect protection against damage to the radiator and is very easy to install. Drilling or modifications to the vehicle are not necessary. The radiator grille is easy to remove for cleaning.

Radiator grille water cooler black for BMW S 1000 XR (2015-2019)R&G radiator grille made of plastic-coated aluminium is the perfect protection against damage to the radiator and is very easy to install. Drilling or modifications to the vehicle are not necessary. The radiator grille is easy to remove for cleaning.

Radiator grille water cooler black for Ducati Multistrada 950 (2017-2020)R&G radiator grille made of plastic-coated aluminium is the perfect protection against damage to the radiator and is very easy to install. Drilling or modifications to the vehicle are not necessary. The radiator grille is easy to remove for cleaning.

Radiator grille water cooler black for Honda CBR600F (2011-2013)R&G radiator grille made of plastic-coated aluminium is the perfect protection against damage to the radiator and is very easy to install. Drilling or modifications to the vehicle are not necessary. The radiator grille is easy to remove for cleaning.

Radiator grille water cooler black for Honda CBR600RR (2013-2017)R&G radiator grille made of plastic-coated aluminium is the perfect protection against damage to the radiator and is very easy to install. Drilling or modifications to the vehicle are not necessary. The radiator grille is easy to remove for cleaning.

Radiator grille water cooler black for Suzuki GSX-R 1000 (2005-2006)R&G radiator grille made of plastic-coated aluminium is the perfect protection against damage to the radiator and is very easy to install. Drilling or modifications to the vehicle are not necessary. The radiator grille is easy to remove for cleaning.

Radiator grille water cooler black for Suzuki GSX-R 1000 (2007-2008)R&G radiator grille made of plastic-coated aluminium is the perfect protection against damage to the radiator and is very easy to install. Drilling or modifications to the vehicle are not necessary. The radiator grille is easy to remove for cleaning.

Radiator grille water cooler black for Yamaha R125 (2014-2018)R&G radiator grille made of plastic-coated aluminium is the perfect protection against damage to the radiator and is very easy to install. Drilling or modifications to the vehicle are not necessary. The radiator grille is easy to remove for cleaning.

Clutch protector for Aprilia RSV 4 RR RF 2015-The engine housing protectors have been tested and developed in cooperation with selected racing teams in the R & G Racing Suzuki GSX-R Trophy. Made of 4mm polypropylene with very high strength for perfect durability. With the ingenious design you complement the R&G Crash Protectors perfectly.The covers are simply screwed over the original motor housing. With the ultra-light Slimline design for maximum ground clearance and the matt finish, you are the perfect protection for the most vulnerable parts of the machine. This saves a lot of money in case of a fall ... Have you ever calculated the price of a new engine housing or the cost of removing the dirt from your engine?Advantage over carbon covers Product is screwed and not glued, which ensures quick and easy installation and quick replacement Screws for mounting are included in the delivery

Radiator grille oil cooler silver for Ducati Scrambler 2015- Monster 797 2017-R&G radiator grille made of plastic-coated aluminium is the perfect protection against damage to the radiator and is very easy to install. Drilling or modifications to the vehicle are not necessary. The radiator grille is easy to remove for cleaning.

Side stand puck for BMW S1000R (2014-2016)Forget your side stand Puck Never again!The side stand Puck increases the contact surface of the side stand by up to 100% and thus meets the requirements of any surface. The load of the motorcycle is better distributed due to the larger contact surface and the danger of tipping or sinking into the ground is no longer given. Despite this extension, the puck does not restrict the ground clearance or interfere with the chain in its movement.The puck is made to fit exactly on the production stand. It is made of aluminium with a stainless steel lid. The product can be installed in a few minutes because it is clamped together with three countersunk Allen screws Colours: black / silver Material: aluminium / stainless steel

Side stand Puck for Honda NC750 (2014-2020)Forget your side stand Puck Never again!The side stand Puck increases the contact surface of the side stand by up to 100% and thus meets the requirements of any surface. The load of the motorcycle is better distributed due to the larger contact surface and the danger of tipping or sinking into the ground is no longer given. Despite this extension, the puck does not restrict the ground clearance or interfere with the chain in its movement.The puck is made to fit exactly on the production stand. It is made of aluminium with a stainless steel lid. The product can be installed in a few minutes because it is clamped together with three countersunk Allen screws Colours: black / silver Material: aluminium / stainless steel

Side stand Puck for Suzuki GSX-S 750 (2017-2021)Forget your side stand Puck Never again!The side stand Puck increases the contact surface of the side stand by up to 100% and thus meets the requirements of any surface. The load of the motorcycle is better distributed due to the larger contact surface and the danger of tipping or sinking into the ground is no longer given. Despite this extension, the puck does not restrict the ground clearance or interfere with the chain in its movement.The puck is made to fit exactly on the production stand. It is made of aluminium with a stainless steel lid. The product can be installed in a few minutes because it is clamped together with three countersunk Allen screws Colours: black / silver Material: aluminium / stainless steel

Side stand puck for Yamaha MT-09 (2017-2020)Forget your side stand Puck Never again!The side stand Puck increases the contact surface of the side stand by up to 100% and thus meets the requirements of any surface. The load of the motorcycle is better distributed due to the larger contact surface and the danger of tipping or sinking into the ground is no longer given. Despite this extension, the puck does not restrict the ground clearance or interfere with the chain in its movement.The puck is made to fit exactly on the production stand. It is made of aluminium with a stainless steel lid. The product can be installed in a few minutes because it is clamped together with three countersunk Allen screws Colours: black / silver Material: aluminium / stainless steel

Side stand Puck for Yamaha XJ-6 N Diversion (2009-2014)Forget your side stand Puck Never again!The side stand Puck increases the contact surface of the side stand by up to 100% and thus meets the requirements of any surface. The load of the motorcycle is better distributed due to the larger contact surface and the danger of tipping or sinking into the ground is no longer given. Despite this extension, the puck does not restrict the ground clearance or interfere with the chain in its movement.The puck is made to fit exactly on the production stand. It is made of aluminium with a stainless steel lid. The product can be installed in a few minutes because it is clamped together with three countersunk Allen screws Colours: black / silver Material: aluminium / stainless steel

Mirror covers for Honda CBR1000RR SP SP2 (2017-2019)If you remove the mirrors on your bike, e.g. for the race track or on the road, our cover plates prevent the fairing from fluttering!The covers fit the mounting points for the original mirror. Assembly and disassembly is simple and done in seconds.

Mirror covers for Kawasaki ZX-6 R 2009-If you remove the mirrors on your bike, e.g. for the race track or on the road, our cover plates prevent the fairing from fluttering!The covers fit the mounting points for the original mirror. Assembly and disassembly is simple and done in seconds.

TITAN radiator grille water cooler for BMW S1000R RR HP4R&G Titanium radiator grilles are lightweight and super strong, thanks to the use of real titanium material (ASTM B265 Grade 1) for the honeycomb mesh, which is surrounded by a seamless aluminum frame. The titanium honeycombs are twice as strong as standard aluminium honeycombs and offer excellent protection against road dirt such as: stones, tyre rubber etc They are used in the British Superbike Championship (BSB) by racing teams like Riders BMW and the RAF Reserve BSB Racing, as well as by many Isle of Man racing teams!

TITAN radiator grille water cooler for BMW S1000RR (2015-2018)R&G Titanium radiator grilles are lightweight and super strong, thanks to the use of real titanium material (ASTM B265 Grade 1) for the honeycomb mesh, which is surrounded by a seamless aluminum frame. The titanium honeycombs are twice as strong as standard aluminium honeycombs and offer excellent protection against road dirt such as: stones, tyre rubber etc They are used in the British Superbike Championship (BSB) by racing teams like Riders BMW and the RAF Reserve BSB Racing, as well as by many Isle of Man racing teams!

Turn signal adapter plates for Suzuki GSX-S 1000 GSX-S 750 (2017-2021) Pair price Turn signal adapter plates for front

R&G Micro Aero LED indicators in the shape of the popular Aero crash pads. The indicators can be fitted at the front or rear and are supplied in pairs with clear lenses. Two color options are available: black or silver.Note: This product is not assigned to a specific vehicle - please check whether this item fits and/or is required.

Exhaust Protector from R&G EP0006BK TheR&G Exhaust Protector, protects the silencer from scratches and can prevent worse. The mounting is simple, no drilling or similar is necessary. The protector can be removed again without leaving any residue. MIte the protection for the exhaust, you buy a great product that works and can save you a lot of money in case of a crash.

Exhaust Protector from R&G EP0009BK TheR&G Exhaust Protector, protects the silencer from scratches and can prevent worse. The mounting is simple, no drilling or similar is necessary. The protector can be removed again without leaving any residue. MIte the protection for the exhaust, you buy a great product that works and can save you a lot of money in case of a crash.

Exhaust Protector from R&G EP0010BK TheR&G Exhaust Protector, protects the silencer from scratches and can prevent worse. The mounting is simple, no drilling or similar is necessary. The protector can be removed again without leaving any residue. MIte the protection for the exhaust, you buy a great product that works and can save you a lot of money in case of a crash.

Display protection film for BMW R 1200 R RS (2015-2018)The R&G Second Skin Dashboard, speedo protection film kit is made of very high quality and scratch resistant material. The custom-cut screen protector is designed to protect the sensitive screen of your motorcycle from unwanted scratches and stains.The kit contains detailed instructions for placing the R&G Second Skin Dashboard Protection KitScope of delivery are:2 pieces R&G Second Skin Dashboard protection kits cut to fit your motorcycle (1x replacement) 1 x mini spray bottle 1 x suede polishing cloth 1 x wet and dry wipe 1 x squeegee and dust removal strips

Display protection film for Honda CRF 1000L Africa Twin (2016-2017)The R&G Second Skin Dashboard, speedo protection film kit is made of very high quality and scratch resistant material. The custom-cut screen protector is designed to protect the sensitive screen of your motorcycle from unwanted scratches and stains.The kit contains detailed instructions for placing the R&G Second Skin Dashboard Protection KitScope of delivery are:2 pieces R&G Second Skin Dashboard protection kits cut to fit your motorcycle (1x replacement) 1 x mini spray bottle 1 x suede polishing cloth 1 x wet and dry wipe 1 x squeegee and dust removal strips

Display protection film for Kawasaki Z 650 Z900 (2017-2019)The R&G Second Skin Dashboard, speedo protection film kit is made of very high quality and scratch resistant material. The custom-cut screen protector is designed to protect the sensitive screen of your motorcycle from unwanted scratches and stains.The kit contains detailed instructions for placing the R&G Second Skin Dashboard Protection KitScope of delivery are:2 pieces R&G Second Skin Dashboard protection kits cut to fit your motorcycle (1x replacement) 1 x mini spray bottle 1 x suede polishing cloth 1 x wet and dry wipe 1 x squeegee and dust removal strips

Display protection film for KTM 1290 Super GT (2019-2021)The R&G Second Skin Dashboard, speedo protection film kit is made of very high quality and scratch resistant material. The custom-cut screen protector is designed to protect the sensitive screen of your motorcycle from unwanted scratches and stains.The kit contains detailed instructions for placing the R&G Second Skin Dashboard Protection KitScope of delivery are:2 pieces R&G Second Skin Dashboard protection kits cut to fit your motorcycle (1x replacement) 1 x mini spray bottle 1 x suede polishing cloth 1 x wet and dry wipe 1 x squeegee and dust removal strips

Display protection film for KTM Super Duke 1290 R (2014-2016)The R&G Second Skin Dashboard, speedo protection film kit is made of very high quality and scratch resistant material. The custom-cut screen protector is designed to protect the sensitive screen of your motorcycle from unwanted scratches and stains.The kit contains detailed instructions for placing the R&G Second Skin Dashboard Protection KitScope of delivery are:2 pieces R&G Second Skin Dashboard protection kits cut to fit your motorcycle (1x replacement) 1 x mini spray bottle 1 x suede polishing cloth 1 x wet and dry wipe 1 x squeegee and dust removal strips

Display protection film for Yamaha MT-09 Tracer (2015-) Tracer 900 (2017-2020)The R&G Second Skin Dashboard, speedo protection film kit is made of very high quality and scratch resistant material. The custom-cut screen protector is designed to protect the sensitive screen of your motorcycle from unwanted scratches and stains.The kit contains detailed instructions for placing the R&G Second Skin Dashboard Protection KitScope of delivery are:2 pieces R&G Second Skin Dashboard protection kits cut to fit your motorcycle (1x replacement) 1 x mini spray bottle 1 x suede polishing cloth 1 x wet and dry wipe 1 x squeegee and dust removal strips

Radiator grille water cooler black for Kawasaki Z900 RS (2018-2020)R&G radiator grille made of plastic-coated aluminium is the perfect protection against damage to the radiator and is very easy to install. Drilling or modifications to the vehicle are not necessary. The radiator grille is easy to remove for cleaning.

Crash pads for Ducati ScramblerColour: black left and right side

License plate holder RG for BMW S1000RR (2019-2022)| M1000RR (2021-2022) | S1000R (2021-2024) with rear light for accessory indicatorsMade from black powder-coated stainless steel for a perfect look and qualitywith tail light/brake light/license plate light.The license plate holder is used with accessory indicators.Great fit and quality Great lookPlease note: the indicators shown in the pictures are not included in the scope of delivery.

Radiator grille water cooler dark blue for BMW S1000RR (2019-2026)R&G radiator grille made of plastic-coated aluminium is the perfect protection against damage to the radiator and is very easy to install. Drilling or modifications to the vehicle are not necessary. The radiator grille is easy to remove for cleaning.

Screen protector for Honda CB 1000 R (2018-2020)The R&G Second Skin Dashboard, Speedo Screen Protector Kit is made from very high quality and scratch resistant material. The custom cut screen protector is designed to protect the delicate screen of your motorcycle from unwanted scratches and smudges.The kit includes detailed instructions for the placement of the R&G Second Skin Dashboard Protection KitIncluded in delivery are:2 R&G Second Skin Dashboard Protection Kits cut to fit your motorcycle (1x replacement)1 x mini spray bottle1 x suede polishing cloth1 x wet and dry wipe1 x squeegee and dust removal strip

Exhaust bracket set for Kawasaki Ninja 300 (2013-2016)R&G Exhaust bracket made of aluminium with R&G engraving. The exhaust mounts are of very high quality and have a fine design. The kit also includes the pillion footrest cover, which can be used to close the holes after removing the rear footrests.Scope of delivery: Exhaust bracket + footrest cover

Footrest cover for Honda CBR500R CB500F (2013-2015)The R&G footrest covers are used when the rear footrests have been removed to close the holes.The scope of delivery is one piece. On the opposite side is the exhaust bracket.

Radiator grille water cooler black for Ducati Hyperstrada 821 (2013-216) 939 (2016-2017)R&G radiator grille made of plastic-coated aluminium is the perfect protection against damage to the radiator and is very easy to install. Drilling or modifications to the vehicle are not necessary. The radiator grille is easy to remove for cleaning.

Side stand puck for Yamaha MT-09 (2013-2016)Forget your side stand Puck Never again!The side stand Puck increases the contact surface of the side stand by up to 100% and thus meets the requirements of any surface. The load of the motorcycle is better distributed due to the larger contact surface and the danger of tipping or sinking into the ground is no longer given. Despite this extension, the puck does not restrict the ground clearance or interfere with the chain in its movement.The puck is made to fit exactly on the production stand. It is made of aluminium with a stainless steel lid. The product can be installed in a few minutes because it is clamped together with three countersunk Allen screws Colours: black / silver Material: aluminium / stainless steel

Display protection film for KTM Super Duke GT (2016-2020)The R&G Second Skin Dashboard, speedo protection film kit is made of very high quality and scratch resistant material. The custom-cut screen protector is designed to protect the sensitive screen of your motorcycle from unwanted scratches and stains.The kit contains detailed instructions for placing the R&G Second Skin Dashboard Protection KitScope of delivery are:2 pieces R&G Second Skin Dashboard protection kits cut to fit your motorcycle (1x replacement) 1 x mini spray bottle 1 x suede polishing cloth 1 x wet and dry wipe 1 x squeegee and dust removal strips

Screen protector for Yamaha XT 1200 Super Tenere (2014-2018)The R&G Second Skin Dashboard, speedo protection film kit is made of very high quality and scratch resistant material. The custom-cut screen protector is designed to protect the sensitive screen of your motorcycle from unwanted scratches and stains.The kit contains detailed instructions for placing the R&G Second Skin Dashboard Protection KitScope of delivery are:2 pieces R&G Second Skin Dashboard protection kits cut to fit your motorcycle (1x replacement) 1 x mini spray bottle 1 x suede polishing cloth 1 x wet and dry wipe 1 x squeegee and dust removal strips

Footrest cover for Honda CB 500 X (2013-2023)The R&G footrest covers are used when the rear footrests have been removed to close the holes.The scope of delivery is one piece. On the opposite side is the exhaust bracket.

Radiator grille water cooler dark blue for BMW S1000 XR (2020-2023)R&G radiator grille made of plastic-coated aluminium is the perfect protection against damage to the radiator. Drilling or changes to the vehicle are not necessary. The radiator grille is easy to remove for cleaning.

Radiator grille water cooler dark blue for BMW S1000R | M1000R | M1000RR (2021-2026)R&G radiator grille made of plastic coated aluminum is the perfect protection against damage to the radiator. The installation is very simple. Drilling or modifications to the vehicle are not necessary. The radiator grille is easy to remove for cleaning.

The R&G Racing license plate holder is a classic upgrade for anyone who wants to visually "tidy up" the bulky rear of their bike.Here is a brief summary of the most important advantages:Looks: Replaces the often very long original splash guard with a much more compact, sportier solution.Material: The powder-coated stainless steel makes it extremely robust and resistant to corrosion and stone chips.Plug & play: As it uses the original mounting points and is prepared for the OEM indicators, the installation effort remains low - you usually don't have to cut any cables or make new brackets.

The R&G Racing license plate holder is a classic upgrade for anyone who wants to visually "tidy up" the bulky rear of their bike.Here is a brief summary of the most important advantages:Looks: Replaces the often very long original splash guard with a much more compact, sportier solution.Material: The powder-coated stainless steel makes it extremely robust and resistant to corrosion and stone chips.Plug & play: As it uses the original mounting points and is prepared for the OEM indicators, the installation effort remains low - you usually don't have to cut any cables or make new brackets.