TecBike products

The IQ1 license plate holder for original indicatorsBlinker next to the license plate, reflector under the license plate.If you want a sporty and modern design, then this license plate holder is the one for you. The IQ1 series impresses with its unbeatable compactness. Small, light, stable and with the reflector under the license plate.It is mounted on the original mounting points, does not damage any fairing parts and can be dismantled without any problems.TecBike uses only the best materials. The matt black powder coating is just for looks. The inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.You get the license plate holder for:for original indicatorsLicense plate holders are registration-free, the LED license plate light has the required E test mark and a reflector with holder is also included in the scope of delivery.(Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

The IQ1 license plate holder for original indicatorsBlinker next to the license plate, reflector under the license plate.If you want a sporty and modern design, then you can't go past this license plate holder. The IQ1 series impresses with its unbeatable compactness. Small, light, stable and with the reflector under the license plate.It is mounted on the original mounting points, does not damage any parts of the fairing and can be removed without any problems.TecBike uses only the best materials. The matt black powder coating is just for looks. The inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.You get the license plate holder for:for original indicatorsLicense plate holders are registration-free, the LED license plate light has the required E test mark and a reflector with holder is also included in the scope of delivery.(Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

The IQ1 license plate holder for accessory indicatorsBlinker next to the license plate, reflector under the license plate.If you want a sporty and modern design, then you can't go past this license plate holder. The IQ1 series impresses with its unbeatable compactness. Small, light, stable and with the reflector under the license plate.It is mounted on the original mounting points, does not damage any fairing parts and can be dismantled without any problems.TecBike uses only the best materials. The matt black powder coating is just for looks. The inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.You get the license plate holder for:for accessory indicatorsLicense plate holders are registration-free, the LED license plate light has the required E test mark and a reflector with holder is also included in the scope of delivery.(Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

The IQ1 license plate holder for original indicatorsBlinker next to the license plate, reflector under the license plate.If you want a sporty and modern design, then you can't go past this license plate holder. The IQ1 series impresses with its unbeatable compactness. Small, light, stable and with the reflector under the license plate.It is mounted on the original mounting points, does not damage any fairing parts and can be dismantled without any problems.TecBike uses only the best materials. The matt black powder coating is just for looks. The inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.You get the license plate holder for:for original indicatorsLicense plate holders are registration-free, the LED license plate light has the required E test mark and a reflector with holder is also included in the scope of delivery.(Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

The IQ1 license plate holder for original indicatorsBlinker next to the license plate, reflector under the license plate.If you want a sporty and modern design, then this license plate holder is the one for you. The IQ1 series impresses with its unbeatable compactness. Small, light, stable and with the reflector under the license plate.It is mounted on the original mounting points, does not damage any fairing parts and can be dismantled without any problems.TecBike uses only the best materials. The matt black powder coating is just for looks. The inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.You get the license plate holder for:for original indicatorsLicense plate holders are registration-free, the LED license plate light has the required E test mark and a reflector with holder is also included in the scope of delivery.(Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

The IQ1 license plate holder for original indicatorsBlinker next to the license plate, reflector under the license plate.If you want a sporty and modern design, then this license plate holder is the one for you. The IQ1 series impresses with its unbeatable compactness. Small, light, stable and with the reflector under the license plate.It is mounted on the original mounting points, does not damage any parts of the fairing and can be removed without any problems.TecBike uses only the best materials. The matt black powder coating is just for looks. The inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.You get the license plate holder for:for original indicatorsLicense plate holders are registration-free, the LED license plate light has the required E test mark and a reflector with holder is also included in the scope of delivery.(Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

The IQ1 license plate holder for original indicatorsBlinker next to the license plate, reflector under the license plate.If you want a sporty and modern design, then you can't go past this license plate holder. The IQ1 series impresses with its unbeatable compactness. Small, light, stable and with the reflector under the license plate.It is mounted on the original mounting points, does not damage any fairing parts and can be dismantled without any problems.TecBike uses only the best materials. The matt black powder coating is just for looks. The inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.You get the license plate holder for:for original indicatorsLicense plate holders are registration-free, the LED license plate light has the required E test mark and a reflector with holder is also included in the scope of delivery.(Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

The IQ1 license plate holder for accessory indicatorsBlinker next to the license plate, reflector under the license plate.If you want a sporty and modern design, then you can't go past this license plate holder. The IQ1 series impresses with its unbeatable compactness. Small, light, stable and with the reflector under the license plate.It is mounted on the original mounting points, does not damage any parts of the fairing and can be removed without any problems.TecBike uses only the best materials. The matt black powder coating is just for looks. The inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.You get the license plate holder for:for accessory indicatorsLicense plate holders are registration-free, the LED license plate light has the required E test mark and a reflector with holder is also included in the scope of delivery.(Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

The IQ1 license plate holder for accessory indicatorsBlinker next to the license plate, reflector under the license plate.If you want a sporty and modern design, then you can't go past this license plate holder. The IQ1 series impresses with its unbeatable compactness. Small, light, stable and with the reflector under the license plate.It is mounted on the original mounting points, does not damage any parts of the fairing and can be removed without any problems.TecBike uses only the best materials. The matt black powder coating is just for looks. The inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.You get the license plate holder for:for accessory indicatorsLicense plate holders are registration-free, the LED license plate light has the required E test mark and a reflector with holder is also included in the scope of delivery.(Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

The IQ1 license plate holder for original indicatorsBlinker next to the license plate, reflector under the license plate.If you want a sporty and modern design, then this license plate holder is the one for you. The IQ1 series impresses with its unbeatable compactness. Small, light, stable and with the reflector under the license plate.It is mounted on the original mounting points, does not damage any fairing parts and can be dismantled without any problems.TecBike uses only the best materials. The matt black powder coating is just for looks. The inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.You get the license plate holder for:for original indicatorsLicense plate holders are registration-free, the LED license plate light has the required E test mark and a reflector with holder is also included in the scope of delivery.(Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

The IQ1 license plate holder for original indicatorsBlinker next to the license plate, reflector under the license plate.If you want a sporty and modern design, then you can't go past this license plate holder. The IQ1 series impresses with its unbeatable compactness. Small, light, stable and with the reflector under the license plate.It is mounted on the original mounting points, does not damage any parts of the fairing and can be removed without any problems.TecBike uses only the best materials. The matt black powder coating is just for looks. The inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.You get the license plate holder for:for original indicatorsLicense plate holders are registration-free, the LED license plate light has the required E test mark and a reflector with holder is also included in the scope of delivery.(Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

The IQ1 license plate holder for accessory indicatorsBlinker next to the license plate, reflector under the license plate.If you want a sporty and modern design, then you can't go past this license plate holder. The IQ1 series impresses with its unbeatable compactness. Small, light, stable and with the reflector under the license plate.It is mounted on the original mounting points, does not damage any parts of the fairing and can be removed without any problems.TecBike uses only the best materials. The matt black powder coating is just for looks. The inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.You get the license plate holder for:for accessory indicatorsLicense plate holders are registration-free, the LED license plate light has the required E test mark and a reflector with holder is also included in the scope of delivery.(Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

The IQ1 license plate holder for accessory indicatorsBlinker next to the license plate, reflector under the license plate.If you want a sporty and modern design, then you can't go past this license plate holder. The IQ1 series impresses with its unbeatable compactness. Small, light, stable and with the reflector under the license plate.It is mounted on the original mounting points, does not damage any parts of the fairing and can be removed without any problems.TecBike uses only the best materials. The matt black powder coating is just for looks. The inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.You get the license plate holder for:for accessory indicatorsLicense plate holders are registration-free, the LED license plate light has the required E test mark and a reflector with holder is also included in the scope of delivery.(Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

The IQ1 license plate holder for accessory indicatorsBlinker next to the license plate, reflector under the license plate.If you want a sporty and modern design, then you can't go past this license plate holder. The IQ1 series impresses with its unbeatable compactness. Small, light, stable and with the reflector under the license plate.It is mounted on the original mounting points, does not damage any parts of the fairing and can be removed without any problems.TecBike uses only the best materials. The matt black powder coating is just for looks. The inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.You get the license plate holder for:for accessory indicatorsLicense plate holders are registration-free, the LED license plate light has the required E test mark and a reflector with holder is also included in the scope of delivery.(Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

The IQ1 license plate holder for original indicatorsBlinker next to the license plate, reflector under the license plate.If you want a sporty and modern design, then you can't go past this license plate holder. The IQ1 series impresses with its unbeatable compactness. Small, light, stable and with the reflector under the license plate.It is mounted on the original mounting points, does not damage any parts of the fairing and can be removed without any problems.TecBike uses only the best materials. The matt black powder coating is just for looks. The inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.You get the license plate holder for:for original indicatorsLicense plate holders are registration-free, the LED license plate light has the required E test mark and a reflector with holder is also included in the scope of delivery.(Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

The IQ1 license plate holder for accessory indicatorsBlinker next to the license plate, reflector under the license plate.If you want a sporty and modern design, then you can't go past this license plate holder. The IQ1 series impresses with its unbeatable compactness. Small, light, stable and with the reflector under the license plate.It is mounted on the original mounting points, does not damage any fairing parts and can be dismantled without any problems.TecBike uses only the best materials. The matt black powder coating is just for looks. The inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.You get the license plate holder for:for accessory indicatorsLicense plate holders are registration-free, the LED license plate light has the required E test mark and a reflector with holder is also included in the scope of delivery.(Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

The IQ1 license plate holder for accessory indicatorsBlinker next to the license plate, reflector under the license plate.If you want a sporty and modern design, then you can't go past this license plate holder. The IQ1 series impresses with its unbeatable compactness. Small, light, stable and with the reflector under the license plate.It is mounted on the original mounting points, does not damage any fairing parts and can be dismantled without any problems.TecBike uses only the best materials. The matt black powder coating is just for looks. The inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.You get the license plate holder for:for accessory indicatorsLicense plate holders are registration-free, the LED license plate light has the required E test mark and a reflector with holder is also included in the scope of delivery.(Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

The IQ1 license plate holder for accessory indicatorsBlinker next to the license plate, reflector under the license plate.If you want a sporty and modern design, then you can't go past this license plate holder. The IQ1 series impresses with its unbeatable compactness. Small, light, stable and with the reflector under the license plate.It is mounted on the original mounting points, does not damage any fairing parts and can be dismantled without any problems.TecBike uses only the best materials. The matt black powder coating is just for looks. The inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.You get the license plate holder for:for accessory indicatorsLicense plate holders are registration-free, the LED license plate light has the required E test mark and a reflector with holder is also included in the scope of delivery.(Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

The IQ1 license plate holder for accessory indicatorsBlinker next to the license plate, reflector under the license plate.If you want a sporty and modern design, then you can't go past this license plate holder. The IQ1 series impresses with its unbeatable compactness. Small, light, stable and with the reflector under the license plate.It is mounted on the original mounting points, does not damage any parts of the fairing and can be removed without any problems.TecBike uses only the best materials. The matt black powder coating is just for looks. The inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.You get the license plate holder for:for accessory indicatorsLicense plate holders are registration-free, the LED license plate light has the required E test mark and a reflector with holder is also included in the scope of delivery.(Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

On the IQ5 license plate holder for Kawasaki Z650 S (2026-2027)the indicators are mounted above the license plate on the holder for the reflector and license plate light. The big advantage is that it looks good and is "tidy" and any license plate width is possible!simple installation at the original mounting pointsno cutting of the original fairing parts necessarylightweight and extremely stableMaterials: stainless steel and/or aluminumblack powder coatinginfinitely adjustable in height and inclinationthe inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.Included in the scope of delivery:License plate holder with LED license plate light and self-adhesive reflector EC approvedOptionally for original indicators or accessory indicatorsMounting material: screws, nuts, washers, etc.License plate holders are TÜV, ABE and registration-freeDo you have any questions? We will be happy to advise you.Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from us.

The IQ4 license plate holder is compatible with either factory turn signals or aftermarket turn signals Turn signals next to the license plate, reflector above the license plate.If you’re looking for a sporty and modern design, you really can’t go past this license plate holder. The IQ4 series stands out for its unbeatable compactness. Small, lightweight, sturdy, and—with the reflector above the license plate—a real visual treat.It mounts to the original mounting points. Body panels remain undamaged, and removal is hassle-free.TecBike uses only the best materials. The matte black powder coating is purely for aesthetic purposes. The angle of the license plate holder can be continuously adjusted to the legally required 30°.You can customize your own license plate holder:For original turn signalsfor aftermarket turn signalsLicense plate holders do not require registration; the LED license plate light has the required E-mark certification, and a reflector with mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike.)

The IQ4 license plate holder for original turn signals. Turn signals next to the license plate, reflector above the license plate.If you’re looking for a sporty and modern design, you really can’t go past this license plate holder. The IQ4 series stands out for its unbeatable compactness. Small, lightweight, sturdy, and—with the reflector positioned above the license plate—a real visual treat.It mounts to the original mounting points. Body panels remain undamaged, and removal is hassle-free.TecBike uses only the finest materials. The matte black powder coating is purely for aesthetic purposes. The angle of the license plate holder can be continuously adjusted to the legally required 30° angle.You’ll receive the license plate holderfor original turn signalsLicense plate holders do not require registration; the LED license plate light has the required E-mark, and a reflector with mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike)

On the IQ5 license plate holder for Kawasaki Z1100 | Z1100 SE (2026-2027) for original indicatorsthe indicators are mounted above the license plate on the holder for the reflector and license plate light. The big advantage is that it looks good and is "tidy" and any license plate width is possible!simple installation at the original mounting pointsno cutting of the original fairing parts necessarylightweight and extremely stableMaterials: stainless steel and/or aluminumblack powder coatinginfinitely adjustable in height and inclinationthe inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.Included in the scope of delivery:License plate holder with LED license plate light and self-adhesive reflector ECE approvedBlinker mounting for original indicatorsMounting material: screws, nuts, washers, etc.License plate holders are TÜV, ABE and registration-freeDo you have any questions? We will be happy to advise you.Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from us.

The IQ4 license plate holder, compatible with either original or aftermarket turn signals Turn signals next to the license plate, reflector above the license plate.If you’re looking for a sporty and modern design, you really can’t go past this license plate holder. The IQ4 series stands out for its unbeatable compactness. Small, lightweight, sturdy, and with the reflector above the license plate, it’s a visual treat.It mounts to the original mounting points. Body panels remain undamaged, and removal is hassle-free.TecBike uses only the best materials. The matte black powder coating is purely for aesthetic purposes. The angle of the license plate holder can be continuously adjusted to the legally required 30°.You can customize your own license plate holder:For original turn signalsfor aftermarket turn signalsLicense plate holders do not require registration; the LED license plate light has the required E-mark certification, and a reflector with mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike.)

The IQ4 license plate holder, compatible with either original or aftermarket turn signals Turn signals next to the license plate, reflector above the license plate.If you’re looking for a sporty and modern design, you really can’t go past this license plate holder. The IQ4 series stands out for its unbeatable compactness. Small, lightweight, sturdy, and with the reflector above the license plate, it’s a visual treat.It mounts to the original mounting points. Body panels remain undamaged, and removal is hassle-free.TecBike uses only the best materials. The matte black powder coating is purely for aesthetic purposes. The angle of the license plate holder can be continuously adjusted to the legally required 30° angle.You can customize your own license plate holder:For original turn signalsfor aftermarket turn signalsLicense plate holders do not require registration; the LED license plate light has the required E-mark certification, and a reflector with mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike.)

The IQ4 license plate holder for original turn signals. Turn signals next to the license plate, reflector above the license plate.If you’re looking for a sporty and modern design, you really can’t go past this license plate holder. The IQ4 series stands out for its unbeatable compactness. Small, lightweight, sturdy, and—with the reflector positioned above the license plate—a real visual treat.It mounts to the original mounting points. Body panels remain undamaged, and removal is hassle-free.TecBike uses only the finest materials. The matte black powder coating is purely for aesthetic purposes. The angle of the license plate holder can be continuously adjusted to the legally required 30° angle.You’ll receive the license plate holderfor original turn signalsLicense plate holders do not require registration; the LED license plate light has the required E-mark, and a reflector with mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike)

On the license plate holder IQ5 License plate holder IQ5 for KTM 990 RC R (2026-2027)the tail light/brake light/indicators are mounted above the license plate on the holder for the reflector and license plate light. The big advantage is that it looks good and is "tidy" and any license plate width is possible!simple installation at the original mounting pointsno cutting of the original fairing parts necessarylightweight and extremely stableMaterials: stainless steel and/or aluminumblack powder coatinginfinitely adjustable in height and inclinationthe inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.Included in the scope of delivery:License plate holder with LED license plate light and self-adhesive reflector ECE approvedBlinker mounting optionally for original KTM indicatorsMounting material: screws, nuts, washers, etc.License plate holders are TÜV, ABE and registration-freeDo you have any questions? We will be happy to advise you.Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from us.

On the IQ5 license plate holder for Kawasaki Z900 | Z900 SE (2025-2026) for accessory indicatorsthe indicators are mounted above the license plate on the holder for the reflector and license plate light. The big advantage is that it looks good and is "tidy" and any license plate width is possible!simple installation at the original mounting pointsno cutting of the original fairing parts necessarylightweight and extremely stableMaterials: stainless steel and/or aluminumblack powder coatinginfinitely adjustable in height and inclinationthe inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.Included in the scope of delivery:License plate holder with LED license plate light and self-adhesive reflector ECE approvedBlinker mounting for accessory indicatorsMounting material: screws, nuts, washers, etc.License plate holders are TÜV, ABE and registration-freeDo you have any questions? We will be happy to advise you.Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from us.

The racer among the IQ7 license plate holders for Yamaha MT-125 (2020-2026)easy mounting on the original mounting points no cutting of the original fairing parts necessary Turn signal attachment: optional for accessory turn signal or original turn signal lightweight and extremely stable due to intelligent edging Top optics in a sporty design high-quality materials (only stainless steel and aluminium) high-quality black powder coating Width of the licence plate holder 175 mm infinitely variable Included in delivery:License plate holder complete LED license plate light E tested Reflector + holder Mounting material: screws, nuts, U washers, etc License plate holders are TÜV, ABE and registration-free The turn signals partly shown in the pictures are not included in the scope of delivery, but can be ordered from TecBike.

The racer among the license plate holders IQ7 for Yamaha MT-125 (2020-2026)easy mounting on the original mounting points no cutting of the original fairing parts necessary Turn signal attachment: optional for accessory turn signal or original turn signal light and extremely stable due to intelligent edging Top optics in a sporty design high-quality materials (only stainless steel and aluminium) high quality black powder coating Width of the licence plate holder 175 mm infinitely variable Included in delivery:License plate holder complete LED license plate light E tested Reflector + holder Mounting material: screws, nuts, U washers, etc License plate holders are TÜV, ABE and registration-free The turn signals partly shown in the pictures are not included in the scope of delivery, but can be ordered from TecBike.

Premium license plate holder complete set for BMW F900R (2020-2024) | F900XR (2020-2024) from TecBike. Made in Germanysimple and easy mountinglow weightbeautiful optics by sporty designhigh quality materials (only stainless steel and aluminium)high quality powder coatingno cutting of the original fairing parts necessaryIncluded in delivery:License plate holder complete set made of stainless steel and ALUReflector with holderAccessories rear light-brake light with license plate lightthe original or accessory turn signals can be usedColor of the license plate holder: blackMounting materialTÜV, ABE and registration free (all LEGAL)(The partly on the pictures shown turn signals do not belong to the scope of supply, can be ordered however also with TecBike)

The IQ1 license plate holder suitable for Honda CBR600RR (2007-2012) with tinted LED tail light for accessory indicatorsBlinker next to the license plate and reflector under the license plate.with the IQ1 we supply you with a license plate holder with LED tail light, LED license plate light, reflector and mounting material. mounting is very easy and fairing parts do not have to be damaged, dismantling is possible without any problems. The license plate holder is manufactured in Germany and the intelligent (hence the name IQ) edge design makes the license plate holder extremely stable and lightweight. You get the license plate holder for:for accessory indicatorsLED rear light tintedThe inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.License plate holders are registration-free, the LED license plate light has the required E test mark and a reflector with holder is also included in the scope of delivery.(The indicators shown in some of the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

The IQ1 license plate holder with clear oval LED tail lightBlinker next to the license plate and reflector under the license plate.with the IQ1 we supply you with a license plate holder with LED tail light, LED license plate light, reflector and mounting material. Mounting is very easy and trim parts do not have to be damaged, dismantling is possible without any problems. The license plate holder is manufactured in Germany and the intelligent (hence the name IQ) edge design makes the license plate holder extremely stable and lightweight. You get the license plate holder for:for original indicatorsfor accessory indicatorsLED rear light clearThe inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.License plate holders are registration-free, the LED license plate light has the required E test mark and a reflector with holder is also included in the scope of delivery.(The indicators shown in some of the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

The IQ9 license plate holder for accessory indicators Blinker next to the license plate, reflector under the license plate. The original license plate light is still used.If you want a sporty and modern design, then you can't go past this license plate holder. The IQ1 series impresses with its unbeatable compactness. Small, light, stable and with the reflector under the license plate.It is mounted on the original mounting points, does not damage any fairing parts and can be removed without any problems.TecBike uses only the best materials. The matt black powder coating is just for looks. The inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.You get the license plate holder for:for accessory indicatorsLicense plate holders are registration-free, a reflector with holder and E test mark is included in the scope of delivery.(Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

The IQ9 license plate holder for accessory indicators Blinker next to the license plate, reflector under the license plate. The original license plate light is still used.If you want a sporty and modern design, then this license plate holder is the one for you. The IQ1 series impresses with its unbeatable compactness. Small, light, stable and with the reflector under the license plate.It is mounted on the original mounting points, does not damage any fairing parts and can be removed without any problems.TecBike uses only the best materials. The matt black powder coating is just for looks. The inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.You get the license plate holder for:for accessory indicatorsLicense plate holders are registration-free, a reflector with holder and E test mark is included in the scope of delivery.(Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

On the IQ5 license plate holder for Ducati Streetfighter V2 | V2 S (2025-2026)the indicators are mounted above the license plate on the holder for the reflector and license plate light. The big advantage is that it looks good and is "tidy" and any license plate width is possible!simple installation at the original mounting pointsno cutting of the original fairing parts necessarylightweight and extremely stableMaterials: stainless steel and/or aluminumblack powder coatinginfinitely adjustable in height and inclinationthe inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.Included in the scope of delivery:License plate holder with LED license plate light and self-adhesive reflector EC approvedOptionally for original indicators or accessory indicatorsMounting material: screws, nuts, washers, etc.License plate holders are TÜV, ABE and registration-freeDo you have any questions? We will be happy to advise you.Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from us.

On the IQ5 license plate holder for Ducati Streetfighter V4 | V4 S (2025-2026)the indicators are mounted above the license plate on the holder for the reflector and license plate light. The big advantage is that it looks good and is "tidy" and any license plate width is possible!simple installation at the original mounting pointsno cutting of the original fairing parts necessarylightweight and extremely stableMaterials: stainless steel and/or aluminumblack powder coatinginfinitely adjustable in height and inclinationthe inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.Included in the scope of delivery:License plate holder with LED license plate light and self-adhesive reflector EC approvedOptionally for original indicators or accessory indicatorsMounting material: screws, nuts, washers, etc.License plate holders are TÜV, ABE and registration-freeDo you have any questions? We will be happy to advise you.Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from us.

The IQ4 license plate holder for original turn signals. Turn signals next to the license plate, reflector above the license plate.If you’re looking for a sporty and modern design, you really can’t go past this license plate holder. The IQ4 series stands out for its unbeatable compactness. Small, lightweight, sturdy, and—with the reflector positioned above the license plate—a real visual treat.It mounts to the original mounting points. Body panels remain undamaged, and removal is hassle-free.TecBike uses only the finest materials. The matte black powder coating is purely for aesthetic purposes. The angle of the license plate holder can be continuously adjusted to the legally required 30° angle.You’ll receive the license plate holderfor original turn signalsLicense plate holders do not require registration; the LED license plate light has the required E-mark, and a reflector with mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike)

The IQ4 license plate holder for aftermarket turn signals. Turn signals next to the license plate, reflector above the license plate.If you’re looking for a sporty and modern design, you really can’t go past this license plate holder. The IQ4 series stands out for its unbeatable compactness. Small, lightweight, sturdy, and—with the reflector above the license plate—a visual treat.It mounts to the original mounting points. Body panels remain undamaged, and removal is hassle-free.TecBike uses only the finest materials. The matte black powder coating is purely for aesthetic purposes. The angle of the license plate holder can be continuously adjusted to the legally required 30° angle.You’ll receive the license plate holderfor accessory turn signalsLicense plate holders do not require registration; the LED license plate light has the required E-mark, and a reflector with a mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike)

The IQ9 license plate holder for original indicatorsBlinker next to the license plate, reflector under the license plate. The original license plate light is still used.If you want a sporty and modern design, then you can't go past this license plate holder. The IQ1 series impresses with its unbeatable compactness. Small, light, stable and with the reflector under the license plate.It is mounted on the original mounting points, does not damage any fairing parts and can be removed without any problems.TecBike uses only the best materials. The matt black powder coating is just for looks. The inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.You get the license plate holder for:for original indicatorsLicense plate holders are registration-free, the LED license plate light has the required E test mark and a reflector with holder is also included in the scope of delivery.(Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

The IQ4 license plate holder, compatible with either original or aftermarket turn signals Turn signals next to the license plate, reflector above the license plate.If you’re looking for a sporty and modern design, you really can’t go past this license plate holder. The IQ4 series stands out for its unbeatable compactness. Small, lightweight, sturdy, and—with the reflector above the license plate—a real visual treat.It mounts to the original mounting points. Body panels remain undamaged, and removal is hassle-free.TecBike uses only the best materials. The matte black powder coating is purely for aesthetic purposes. The angle of the license plate holder can be continuously adjusted to the legally required 30° angle.You can customize your own license plate holder:For original turn signalsfor aftermarket turn signalsLicense plate holders do not require registration; the LED license plate light has the required E-mark, and a reflector with mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike.)

On the license plate holder IQ5 for Aprilia RSV4 | Tuono V4 (2025-2026)the indicators are mounted above the license plate on the holder for the reflector and license plate light. The big advantage is that it looks good and is "tidy" and any license plate width is possible!simple installation at the original mounting pointsno cutting of the original fairing parts necessarylightweight and extremely stableMaterials: stainless steel and/or aluminumblack powder coatinginfinitely adjustable in height and inclinationthe inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.License plate holder width: 172 mmIncluded in the scope of delivery:License plate holder with LED license plate light and self-adhesive reflector EC approvedOptionally for original indicators or accessory indicatorsMounting material: screws, nuts, washers, etc.License plate holders are TÜV, ABE and registration-freeDo you have any questions? We will be happy to advise you.Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from us.

On the IQ5 license plate holder for Yamaha MT-07 (2025-2026) for accessory indicatorsthe indicators are mounted above the license plate on the holder for the reflector and license plate light. The big advantage is that it looks good and is "tidy" and any license plate width is possible!simple installation at the original mounting pointsno cutting of the original fairing parts necessarylightweight and extremely stableMaterials: stainless steel and/or aluminumblack powder coatinginfinitely adjustable in height and inclinationthe inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.Included in the scope of delivery:License plate holder with LED license plate light and self-adhesive reflector ECE approvedBlinker mounting for accessory indicatorsMounting material: screws, nuts, washers, etc.License plate holders are TÜV, ABE and registration-freeDo you have any questions? We will be happy to advise you.Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from us.

The IQ4 license plate holder for original turn signals. Turn signals next to the license plate, reflector above the license plate.If you’re looking for a sporty and modern design, you really can’t go past this license plate holder. The IQ4 series stands out for its unbeatable compactness. Small, lightweight, sturdy, and—with the reflector positioned above the license plate—a real visual treat.It mounts to the original mounting points. Body panels remain undamaged, and removal is hassle-free.TecBike uses only the finest materials. The matte black powder coating is purely for aesthetic purposes. The angle of the license plate holder can be continuously adjusted to the legally required 30° angle.You’ll receive the license plate holderfor original turn signalsLicense plate holders do not require registration; the LED license plate light has the required E-mark, and a reflector with mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike)

The IQ4 license plate holder for original turn signals. Turn signals next to the license plate, reflector above the license plate.If you’re looking for a sporty and modern design, you really can’t go past this license plate holder. The IQ4 series stands out for its unbeatable compactness. Small, lightweight, sturdy, and—with the reflector positioned above the license plate—a real visual treat.It mounts to the original mounting points. Body panels remain undamaged, and removal is hassle-free.TecBike uses only the finest materials. The matte black powder coating is purely for aesthetic purposes. The angle of the license plate holder can be continuously adjusted to the legally required 30° angle.You’ll receive the license plate holderfor original turn signalsLicense plate holders do not require registration; the LED license plate light has the required E-mark, and a reflector with mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike)

On the IQ5 license plate holder for original indicators, the indicators are mounted above the license plate on the holder for the reflector and license plate light. The big advantage is that it looks good and is "tidy" and any license plate width is possible!simple installation at the original mounting pointsno cutting of the original fairing parts necessarylightweight and extremely stableMaterials: stainless steel and/or aluminumblack powder coatinginfinitely adjustable in height and inclinationthe inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.Included in the scope of delivery:License plate holder with LED license plate light and self-adhesive reflector EC approvedBlinker mounting for original indicatorsMounting material: screws, nuts, washers, etc.License plate holders are TÜV, ABE and registration-freeDo you have any questions? We will be happy to advise you.Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from us.

On the IQ5 license plate holder for Kawasaki Ninja 500 SE | Z500 SE (2024-2026) for accessory indicatorsthe indicators are mounted above the license plate on the holder for the reflector and license plate light. The big advantage is that it looks good and is "tidy" and any license plate width is possible!simple installation at the original mounting pointsno cutting of the original fairing parts necessarylightweight and extremely stableMaterials: stainless steel and/or aluminumblack powder coatinginfinitely adjustable in height and inclinationthe inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.Included in the scope of delivery:License plate holder with LED license plate light and self-adhesive reflector EC approvedfor accessory indicatorsMounting material: screws, nuts, washers, etc.License plate holders are TÜV, ABE and registration-freeDo you have any questions? We will be happy to advise you.Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from us.

The IQ4 license plate holder for original turn signals. Turn signals next to the license plate, reflector above the license plate.If you’re looking for a sporty and modern design, you really can’t go past this license plate holder. The IQ4 series stands out for its unbeatable compactness. Small, lightweight, sturdy, and—with the reflector positioned above the license plate—a real visual treat.It mounts to the original mounting points. Body panels remain undamaged, and removal is hassle-free.TecBike uses only the finest materials. The matte black powder coating is purely for aesthetic purposes. The angle of the license plate holder can be continuously adjusted to the legally required 30° angle.You’ll receive the license plate holderfor original turn signalsLicense plate holders do not require registration; the LED license plate light has the required E-mark, and a reflector with mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike)

The IQ9 license plate holder for original indicatorsBlinker next to the license plate, reflector under the license plate. The original license plate light is still used.If you want a sporty and modern design, then you can't go past this license plate holder. The IQ1 series impresses with its unbeatable compactness. Small, light, stable and with the reflector under the license plate.It is mounted on the original mounting points, does not damage any fairing parts and can be removed without any problems.TecBike uses only the best materials. The matt black powder coating is just for looks. The inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.You get the license plate holder for:for original indicatorsLicense plate holders are registration-free, the LED license plate light has the required E test mark and a reflector with holder is also included in the scope of delivery.(Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

The IQ9 license plate holder for accessory indicators Blinker next to the license plate, reflector under the license plate. The original license plate light is still used.If you want a sporty and modern design, then you can't go past this license plate holder. The IQ1 series impresses with its unbeatable compactness. Small, light, stable and with the reflector under the license plate.It is mounted on the original mounting points, does not damage any fairing parts and can be removed without any problems.TecBike uses only the best materials. The matt black powder coating is just for looks. The inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.You get the license plate holder for:for accessory indicatorsLicense plate holders are registration-free, a reflector with holder and E test mark is included in the scope of delivery.(Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike)

The IQ4 license plate holder for aftermarket turn signals. Turn signals next to the license plate, reflector above the license plate.If you’re looking for a sporty and modern design, you really can’t go past this license plate holder. The IQ4 series stands out for its unbeatable compactness. Small, lightweight, sturdy, and—with the reflector above the license plate—a visual treat.It mounts to the original mounting points. Body panels remain undamaged, and removal is hassle-free.TecBike uses only the finest materials. The matte black powder coating is purely for aesthetic purposes. The angle of the license plate holder can be continuously adjusted to the legally required 30° angle.You’ll receive the license plate holderfor accessory turn signalsLicense plate holders do not require registration; the LED license plate light has the required E-mark certification, and a reflector with mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike)

The IQ4 license plate holder for aftermarket turn signals. Turn signals next to the license plate, reflector above the license plate.If you’re looking for a sporty and modern design, you really can’t go past this license plate holder. The IQ4 series stands out for its unbeatable compactness. Small, lightweight, sturdy, and—with the reflector above the license plate—a visual treat.It mounts to the original mounting points. Body panels remain undamaged, and removal is hassle-free.TecBike uses only the finest materials. The matte black powder coating is purely for aesthetic purposes. The angle of the license plate holder can be continuously adjusted to the legally required 30° angle.You’ll receive the license plate holderfor accessory turn signalsLicense plate holders do not require registration; the LED license plate light has the required E-mark, and a reflector with a mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike)

On the IQ5 license plate holder for Ducati Panigale V2 | V2 S (2025-2026) for accessory indicatorsthe indicators are mounted above the license plate on the holder for the reflector and license plate light. The big advantage is that it looks good and is "tidy" and any license plate width is possible!simple installation at the original mounting pointsno cutting of the original fairing parts necessarylightweight and extremely stableMaterials: stainless steel and/or aluminumblack powder coatinginfinitely adjustable in height and inclinationthe inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.Included in the scope of delivery:License plate holder with LED license plate light and self-adhesive reflector ECE approvedBlinker mounting for accessory indicatorsMounting material: screws, nuts, washers, etc.License plate holders are TÜV, ABE and registration-freeDo you have any questions? We will be happy to advise you.Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from us.

The IQ4 license plate holder for original turn signals. Turn signals next to the license plate, reflector above the license plate.If you’re looking for a sporty and modern design, you really can’t go past this license plate holder. The IQ4 series stands out for its unbeatable compactness. Small, lightweight, sturdy, and—with the reflector positioned above the license plate—a real visual treat.It mounts to the original mounting points. Body panels remain undamaged, and removal is hassle-free.TecBike uses only the finest materials. The matte black powder coating is purely for aesthetic purposes. The angle of the license plate holder can be continuously adjusted to the legally required 30° angle.You’ll receive the license plate holderfor original turn signalsLicense plate holders do not require registration; the LED license plate light has the required E-mark, and a reflector with mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike)

The IQ4 license plate holder for original turn signalsTurn signals next to the license plate, reflector above the license plate.If you’re looking for a sporty and modern design, you really can’t go past this license plate holder. The IQ4 series stands out for its unbeatable compactness. Small, lightweight, sturdy, and—with the reflector above the license plate—a visual treat.It mounts to the original mounting points. Body panels remain undamaged, and removal is hassle-free.TecBike uses only the best materials. The matte black powder coating is purely for aesthetic purposes. The angle of the license plate holder can be continuously adjusted to the legally required 30° angle.You’ll receive your license plate holder for:for original turn signalsLicense plate holders do not require registration; the LED license plate light has the required E-mark, and a reflector with mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike.)

The IQ4 license plate holder for accessory turn signalsTurn signals next to the license plate, reflector above the license plate.If you’re looking for a sporty and modern design, you really can’t go past this license plate holder. The IQ4 series stands out for its unbeatable compactness. Small, lightweight, sturdy, and—with the reflector above the license plate—a visual treat.It mounts to the original mounting points. Body panels remain undamaged, and removal is hassle-free.TecBike uses only the best materials. The matte black powder coating is purely for aesthetic purposes. The angle of the license plate holder can be continuously adjusted to the legally required 30° angle.You’ll receive your license plate holder for:accessory turn signalsLicense plate holders do not require registration; the LED license plate light has the required E-mark certification, and a reflector with a mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike.)

The IQ4 license plate holder for aftermarket turn signals. Turn signals next to the license plate, reflector above the license plate.If you’re looking for a sporty and modern design, you really can’t go past this license plate holder. The IQ4 series stands out for its unbeatable compactness. Small, lightweight, sturdy, and—with the reflector above the license plate—a visual treat.It mounts to the original mounting points. Body panels remain undamaged, and removal is hassle-free.TecBike uses only the finest materials. The matte black powder coating is purely for aesthetic purposes. The angle of the license plate holder can be continuously adjusted to the legally required 30° angle.You’ll receive the license plate holderfor accessory turn signalsLicense plate holders do not require registration; the LED license plate light has the required E-mark certification, and a reflector with mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike)

On the IQ5 license plate holder for Ducati Panigale V4 | V4S (2025-2026) for original indicatorsthe indicators are mounted above the license plate on the holder for the reflector and license plate light. The big advantage is that it looks good and is "tidy" and any license plate width is possible!simple installation at the original mounting pointsno cutting of the original fairing parts necessarylightweight and extremely stableMaterials: stainless steel and/or aluminumblack powder coatinginfinitely adjustable in height and inclinationthe inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.Included in the scope of delivery:License plate holder with LED license plate light and self-adhesive reflector ECE approvedBlinker mounting for original indicatorsMounting material: screws, nuts, washers, etc.License plate holders are TÜV, ABE and registration-freeDo you have any questions? We will be happy to advise you.Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from us.

The IQ4 license plate holder for original turn signals. Turn signals next to the license plate, reflector above the license plate.If you’re looking for a sporty and modern design, you really can’t go past this license plate holder. The IQ4 series stands out for its unbeatable compactness. Small, lightweight, sturdy, and—with the reflector above the license plate—a visual treat.It mounts to the original mounting points. Body panels remain undamaged, and removal is hassle-free.TecBike uses only the finest materials. The matte black powder coating is purely for aesthetic purposes. The angle of the license plate holder can be continuously adjusted to the legally required 30° angle.You’ll receive the license plate holderfor original turn signalsLicense plate holders do not require registration; the LED license plate light has the required E-mark, and a reflector with mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike)

On the IQ5 license plate holder for Honda CB1000 Hornet (2025-2026) for accessory indicatorsthe indicators are mounted above the license plate on the holder for the reflector and license plate light. The big advantage is that it looks good and is "tidy" and any license plate width is possible!simple installation at the original mounting pointsno cutting of the original fairing parts necessarylightweight and extremely stableMaterials: stainless steel and/or aluminumblack powder coatinginfinitely adjustable in height and inclinationthe inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.Included in the scope of delivery:License plate holder with LED license plate light and self-adhesive reflector ECE approvedBlinker mounting for accessory indicatorsMounting material: screws, nuts, washers, etc.License plate holders are TÜV, ABE and registration-freeDo you have any questions? We will be happy to advise you.Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from us.

The IQ4 license plate holder for original turn signals. Turn signals next to the license plate, reflector above the license plate.If you’re looking for a sporty and modern design, you really can’t go past this license plate holder. The IQ4 series stands out for its unbeatable compactness. Small, lightweight, sturdy, and—with the reflector positioned above the license plate—a real visual treat.It mounts to the original mounting points. Body panels remain undamaged, and removal is hassle-free.TecBike uses only the finest materials. The matte black powder coating is purely for aesthetic purposes. The angle of the license plate holder can be continuously adjusted to the legally required 30° angle.You’ll receive the license plate holderfor original turn signalsLicense plate holders do not require registration; the LED license plate light has the required E-mark, and a reflector with mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike)

At the license plate holder IQ5 for Kawasaki Ninja 125 (2019-2024)the turn signals are mounted above the license plate on the holder for the reflector and license plate light. The big advantage is, it looks good and , is "tidy" and any license plate width is possible!easy mounting at the original mounting pointsno cutting of the original fairing parts necessarylight and extremely stableMaterials: stainless steel and/or aluminiumblack powder coatingsteplessly adjustable in height and inclinationthe inclination of the license plate holder can be adjusted steplessly to the legally required inclination of 30°.Included in delivery:License plate holder with LED license plate light and self-adhesive reflector EC approvedOptionally for original turn signals or accessory turn signalsMounting material: screws, nuts, washers, etc.License plate holder are TÜV, ABE and registration freeDo you have any questions? We advise you gladly.The partly on the pictures shown turn signals do not belong to the scope of supply, can be ordered however also with us.

The IQ4 license plate holder for aftermarket turn signals. Turn signals next to the license plate, reflector above the license plate.If you’re looking for a sporty and modern design, you really can’t go past this license plate holder. The IQ4 series stands out for its unbeatable compactness. Small, lightweight, sturdy, and—with the reflector above the license plate—a visual treat.It mounts to the original mounting points. Body panels remain undamaged, and removal is hassle-free.TecBike uses only the finest materials. The matte black powder coating is purely for aesthetic purposes. The angle of the license plate holder can be continuously adjusted to the legally required 30° angle.You’ll receive the license plate holderfor accessory turn signalsLicense plate holders do not require registration; the LED license plate light has the required E-mark certification, and a reflector with a mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike)

On the license plate holder IQ5 Yamaha MT-09 (2024-2026)the indicators are mounted above the license plate on the holder for the reflector and license plate light. The big advantage is that it looks good and is "tidy" and any license plate width is possible!simple installation at the original mounting pointsno cutting of the original fairing parts necessarylightweight and extremely stableMaterials: stainless steel and/or aluminumblack powder coatinginfinitely adjustable in height and inclinationthe inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.Included in the scope of delivery:License plate holder with LED license plate light and self-adhesive reflector EC approvedOptionally for original indicators or accessory indicatorsMounting material: screws, nuts, washers, etc.License plate holders are TÜV, ABE and registration-freeDo you have any questions? We will be happy to advise you.Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from us.

With the IQ5 License Plate Holder for KTM 990 Duke | Duke R (2024–2026)the taillight, brake light, and turn signals are mounted above the license plate on the bracket for the reflector and license plate light. The big advantage is that it looks great and keeps things “tidy”—plus, it accommodates any license plate width!Easy installation using the original mounting pointsNo need to cut the original body panelsLightweight and extremely sturdyMaterials: Stainless steel and/or aluminumBlack powder coatingInfinitely adjustable in height and angleThe angle of the license plate holder can be continuously adjusted to the legally required angle of 30°.Included in delivery:License plate holder with LED license plate light and self-adhesive reflector (ECE-approved)Turn signal mount for original KTM turn signalsMounting hardware: screws, nuts, U-washers, etc.License plate holders are TÜV-approved, ABE-certified, and do not require registrationDo you have any questions? We’d be happy to help.The turn signals shown in some of the pictures are not included in the package but can also be ordered from us.

On the license plate holder IQ5 Yamaha MT-10 | SP (2022-2024)the indicators are mounted above the license plate on the holder for the reflector and license plate light. The big advantage is that it looks good and is "tidy" and any license plate width is possible!simple installation at the original mounting pointsno cutting of the original fairing parts necessarylightweight and extremely stableMaterials: stainless steel and/or aluminumblack powder coatinginfinitely adjustable in height and inclinationthe inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.Included in the scope of delivery:License plate holder with LED license plate light and self-adhesive reflector EC approvedOptionally for original indicators or accessory indicatorsMounting material: screws, nuts, washers, etc.License plate holders are TÜV, ABE and registration-freeDo you have any questions? We will be happy to advise you.Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from us.

On the license plate holder IQ5 License plate holder IQ5 for KTM 1390 Super Duke R | EVO (2024-2026)the tail light/brake light/indicators are mounted above the license plate on the holder for the reflector and license plate light. The big advantage is that it looks good and is "tidy" and any license plate width is possible!simple installation at the original mounting pointsno cutting of the original fairing parts necessarylightweight and extremely stableMaterials: stainless steel and/or aluminumblack powder coatinginfinitely adjustable in height and inclinationthe inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.Included in the scope of delivery:License plate holder with LED license plate light and self-adhesive reflector ECE approvedBlinker mounting for accessory indicators with mounting up to M10Mounting material: screws, nuts, washers, etc.License plate holders are TÜV, ABE and registration-freeDo you have any questions? We will be happy to advise you.Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from us.

The racer among the IQ7 license plate holders for Kawasaki Z900RS (2018-2026)simple installation at the original mounting pointsno cutting of the original fairing parts necessaryBlinker mounting: optionally for accessory indicators or original indicatorslightweight and extremely stable thanks to intelligent edgingTop look in a sporty designhigh-quality materials (only stainless steel and aluminum)high-quality black powder coatingWidth of the license plate holder 175 mmWidth of the blinker mounting 125 mmIncluded in the scope of delivery:Complete license plate holderLED license plate light E testedReflector + holderMounting material: screws, nuts, washers, etc.License plate holders are TÜV, ABE and registration-freeSome of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike.

The IQ4 license plate holder for original turn signals. Turn signals next to the license plate, reflector above the license plate.If you’re looking for a sporty and modern design, you really can’t go past this license plate holder. The IQ4 series stands out for its unbeatable compactness. Small, lightweight, sturdy, and—with the reflector positioned above the license plate—a real visual treat.It mounts to the original mounting points. Body panels remain undamaged, and removal is hassle-free.TecBike uses only the finest materials. The matte black powder coating is purely for aesthetic purposes. The angle of the license plate holder can be continuously adjusted to the legally required 30° angle.You’ll receive the license plate holderfor original turn signalsLicense plate holders do not require registration; the LED license plate light has the required E-mark certification, and a reflector with mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike)

On the license plate holder IQ5 Yamaha R9 (2025-2026) for original indicatorsthe indicators are mounted above the license plate on the holder for the reflector and license plate light. The big advantage is that it looks good and is "tidy" and any license plate width is possible!simple installation at the original mounting pointsno cutting of the original fairing parts necessarylightweight and extremely stableMaterials: stainless steel and/or aluminumblack powder coatinginfinitely adjustable in height and inclinationthe inclination of the license plate holder can be infinitely adjusted to the legally prescribed inclination of 30°.Included in the scope of delivery:License plate holder with LED license plate light and self-adhesive reflector EC approvedfor original indicatorsMounting material: screws, nuts, washers, etc.License plate holders are TÜV, ABE and registration-freeDo you have any questions? We will be happy to advise you.Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from us.

The IQ4 license plate holder for aftermarket turn signals. Turn signals next to the license plate, reflector above the license plate.If you’re looking for a sporty and modern design, you really can’t go past this license plate holder. The IQ4 series stands out for its unbeatable compactness. Small, lightweight, sturdy, and—with the reflector above the license plate—a visual treat.It mounts to the original mounting points. Body panels remain undamaged, and removal is hassle-free.TecBike uses only the finest materials. The matte black powder coating is purely for aesthetic purposes. The angle of the license plate holder can be continuously adjusted to the legally required 30° angle.You’ll receive the license plate holderfor accessory turn signalsLicense plate holders do not require registration; the LED license plate light has the required E-mark certification, and a reflector with mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike)

Premium license plate holder IQ8 for Honda CMX 500 Rebel (2020-2026) from TecBike. Made in Germanysimple and easy mountinglow weightbeautiful optics due to sporty designhigh quality materials (only stainless steel and aluminum)high quality powder coatingno cutting of the original fairing parts necessarysuitable for original turn signals (OB)Included in deliveryStainless steel license plate holderReflector + reflector holderTaillight/brake light with license plate light with E signColor of license plate holder: blackMounting materialTÜV, ABE and registration free (all LEGAL)Turn signals are not included, but can also be purchased at TecBike.

The license plate holder IQ4 with 3-1 mini turn signal-rear light-brake light suitable for BMW S1000R | M1000R (2021-2026)Turn signal next to the license plate and reflector above the license plate.with the IQ1 set we deliver you a license plate holder with LED license plate light, reflector, turn signal and mounting material. the mounting is very easy and fairing parts müßen not be damaged, a dismantling is easily possible. The license plate holder is made in Germany, the intelligent (hence the name IQ) Kantweise makes the license plate holder extremely stable and lightweight.Delivery is PLUG&PLAY mounting in a few minutes.The inclination of the license plate holder can be infinitely adjusted to the legally required inclination of 30 °.License plate holders are registration-free, the LED license plate light and turn signals have the required E mark and a reflector with holder is also included.

The racer among the license plate holders IQ with tail light for KTM 690 SMC R (2019-2022) with tail lighteasy mounting on the original mounting points no cutting of the original fairing parts necessary light and extremely stable due to intelligent edging Top optics in a sporty design high-quality materials (stainless steel) high-quality black powder coating infinitely variable horizontal and vertical adjustment Included in delivery:License plate holder complete Tail light and stop light with LED license plate light ECE tested Reflector + holder Turn signal attachment Original or accessory turn signal Mounting material: screws, nuts, U washers, etc License plate holders are TÜV, ABE and registration-free The turn signals partly shown in the pictures are not included in the scope of delivery, but can be ordered from TecBike.

The racer among the license plate holders IQ7 for GasGas SM700 | ES700 (2022-2024)easy mounting on the original mounting pointsno cutting of the original fairing parts necessarylight and extremely stable due to intelligent bendingTop optics in sporty designhigh quality materials (stainless steel)high quality black powder coatinginfinitely adjustable horizontally and verticallyIncluded in delivery:License plate holderLED license plate lightReflector + holderTurn signal mounting original or accessory turn signalsMounting material: screws, nuts, U washers, etc.License plate holder are TÜV, ABE and registration freeThe turn signals partially shown in the pictures are not included, but can also be ordered from TecBike.

Premium license plate holder IQ8 for Honda CMX 500 Rebel (2017-2019) from TecBike. Made in Germanysimple and easy mountinglow weightbeautiful optics due to sporty designhigh quality materials (only stainless steel and aluminum)high quality powder coatingno cutting of the original fairing parts necessaryONLY suitable for accessory turn signals (ZB)Included in delivery:Stainless steel license plate holderReflector + reflector holderTaillight/brake light with license plate light with E signColor of license plate holder: blackMounting materialTÜV, ABE and registration free (all LEGAL)Turn signals are not included, but can also be purchased at TecBike.

License plate holder IQ6 PRO for KTM 390 Duke | 125 Duke (2024-2025)easy mounting on the original mounting pointsno cutting of the original fairing parts necessarylightweight and extremely stable thanks to intelligent edgingTop look in a sporty designhigh-quality materials (only stainless steel and aluminum)high-quality black powder coatingWidth of the license plate holder 170 mminfinitely adjustableIncluded in the scope of delivery:License plate holderBlinker mounting: for accessory indicators and original indicators LED license plate light E testedReflector E testedMounting material: screws, nuts, washers, etc.License plate holders are TÜV, ABE and registration-freeDo you have any questions? We will be happy to advise you.Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike.Important: when using accessory indicators, the distance (blinker glass to blinker glass) of 180 mm must be maintained. Extensions must be used depending on the length of the indicators. See also under accessories. The distance of the blinker mounting is 115 mm.

The racer among the IQ7 license plate holders for KTM 390 Duke | 125 Duke (2024-2025) simple mounting on the original mounting points no cutting of the original fairing parts necessary lightweight and extremely stable thanks to intelligent edging Top look in a sporty design high-quality materials (only stainless steel and aluminum) high-quality black powder coating Width of the license plate holder 175 mm infinitely adjustable Included in the scope of delivery: Complete license plate holder LED license plate light E tested Reflector + holder Mounting material: screws, nuts, washers, etc. License plate holders are TÜV, ABE and registration-free Some of the indicators shown in the pictures are not included in the scope of delivery, but can also be ordered from TecBike.

License Plate Holder | Turn Signal Bracket with Reflector and License Plate Light for mounting OEM (original) turn signals on the TecBike IQ Series license plate holder.

The IQ1 license plate holder, compatible with the IQ1 license plate mount for the KTM 690 DUKE (2012–2019), features a hexagonal LED taillightTurn signals next to the license plate and a reflector below the license plate.With the IQ1, we provide you with a license plate holder featuring an LED taillight, LED license plate light, reflector, and mounting hardware. Installation is very simple and does not require damaging any fairing parts; removal is also hassle-free. The license plate holder is manufactured in Germany. The intelligent (hence the name IQ) edge design makes the license plate holder extremely sturdy and lightweight. You’ll receive a license plate holder:for aftermarket turn signalsfor original turn signalsTinted LED taillightThe angle of the license plate holder can be continuously adjusted to the legally required 30° angle. License plate holders do not require registration; the LED license plate light has the required E-mark, and a reflector with a mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike.)

The racer among the IQ7 license plate holders for KTM 690 Enduro R (2019-2026)easy mounting on the original mounting points no cutting of the original fairing parts necessary light and extremely stable due to intelligent edging Top optics in a sporty design high-quality materials (stainless steel) high-quality black powder coating infinitely variable horizontal and vertical adjustmentIncluded in delivery:License plate holder LED license plate light Reflector + holder Turn signal attachment Original or accessory turn signal Mounting material: screws, nuts, U washers, etc License plate holders are TÜV, ABE and registration-freeThe turn signals partly shown in the pictures are not included in the scope of delivery, but can be ordered from TecBike.

Universal license plate holder (IQ PRO SERIE) from TecBike. Made in Germanysimple and easy mountinglow weightbeautiful optics due to sporty designhigh quality materials (only stainless steel and aluminium)high quality powder coatingIncluded in delivery:adjustable license plate holder made of stainless steelLED license plate lightReflector with holderColor of the license plate holder: blackMounting materialTÜV, ABE and registration free (all LEGAL)(The partially on the pictures shown turn signals are not included, but can be ordered at TecBike)

Universal license plate holder (IQ PRO SERIE) from TecBike. Made in Germanysimple and easy mountinglow weightbeautiful optics due to sporty designhigh quality materials (only stainless steel and aluminium)high quality powder coatingIncluded in delivery:adjustable license plate holder made of stainless steelLED license plate lightReflector with holderColor of the license plate holder: blackMounting materialTÜV, ABE and registration free (all LEGAL)(The partially on the pictures shown turn signals are not included, but can be ordered at TecBike)

License plate holder IQ7 PRO for Honda CBR650R | CB650R (2019-2020) Turn signal slightly offset behind the license plate and reflector under the license plate. easy mounting on the original mounting points no cutting of the original fairing parts necessary light and extremely stable due to intelligent edging Top optics in sporty design high-quality materials (only stainless steel and aluminium) high-quality black powder coating infinitely adjustable Included in delivery: License plate holder Turn signal attachment: for accessory turn signals and original turn signals LED license plate light E tested Reflector E approved Mounting material: screws, nuts, U washers, etc. License plate holders are TÜV, ABE and registration-free Do you have any questions? We would be happy to advise you. The turn signals partly shown in the pictures are not included in the scope of delivery, but can be ordered from TecBike.

Universal license plate holder (IQ PRO SERIE) from TecBike. Made in Germanysimple and easy mountinglow weightbeautiful optics due to sporty designhigh quality materials (only stainless steel and aluminium)high quality powder coatingIncluded in delivery:adjustable license plate holder made of stainless steelLED license plate lightReflector with holderColor of the license plate holder: blackMounting materialTÜV, ABE and registration free (all LEGAL)Mounting dimensions:Base plate total width 75 x 75 mmHole spacing wide 55 mm, deep 35 mmM6(The partially on the pictures shown turn signals are not included, but can be ordered at TecBike)

The racer among the license plate holders IQ with tail light for KTM 690 Enduro R (2019-2026) with tail lighteasy mounting on the original mounting points no cutting of the original fairing parts necessary light and extremely stable due to intelligent edging Top optics in a sporty design high-quality materials (stainless steel) high-quality black powder coating infinitely variable horizontal and vertical adjustment Included in delivery:License plate holder complete Tail light and stop light with LED license plate light ECE tested Reflector + holder Turn signal attachment Original or accessory turn signal Mounting material: screws, nuts, U washers, etc License plate holders are TÜV, ABE and registration-free The turn signals partly shown in the pictures are not included in the scope of delivery, but can be ordered from TecBike.

The racer among the license plate holders IQ7 and suitable for Ducati Hypermotard 950 | SP | RVE (2019-2025)easy mounting on the original mounting points no cutting of the original fairing parts necessary light and extremely stable due to intelligent edging Top optics in a sporty design high-quality materials (only stainless steel and aluminium) high-quality black powder coating infinitely variable Included in delivery:License plate holder complete for original indicators LED license plate light E tested Reflector + holder Mounting material: screws, nuts, U washers, etc License plate holders are TÜV, ABE and registration-free The turn signals partly shown in the pictures are not included in the scope of delivery, but can be ordered from TecBike.

At the license plate holder IQ5 for Aprilia Tuono V4 1100 Factory (2021-2025) for OBthe turn signals are mounted above the license plate on the holder for the reflector and license plate light. The big advantage is, it looks good and , is "tidy" and any license plate width is possible!easy mounting at the original mounting pointsno cutting of the original fairing parts necessarylight and extremely stableMaterials: stainless steel and/or aluminiumblack powder coatingsteplessly adjustable in height and inclinationthe inclination of the license plate holder can be adjusted steplessly to the legally required inclination of 30°.Included in delivery:License plate holder with LED license plate light and self-adhesive reflector ECE testedTurn signal mounting for original turn signalsMounting material: screws, nuts, washers, etc.License plate holder are TÜV, ABE and registration freeDo you have any questions? We advise you gladly.The partly on the pictures shown turn signals do not belong to the scope of supply, can be ordered however also with us.

The IQ4 license plate holder for original turn signals. Turn signals next to the license plate, reflector above the license plate.If you’re looking for a sporty and modern design, you really can’t go past this license plate holder. The IQ4 series stands out for its unbeatable compactness. Small, lightweight, sturdy, and—with the reflector positioned above the license plate—a real visual treat.It mounts to the original mounting points. Body panels remain undamaged, and removal is hassle-free.TecBike uses only the finest materials. The matte black powder coating is purely for aesthetic purposes. The angle of the license plate holder can be continuously adjusted to the legally required 30° angle.You’ll receive the license plate holderfor original turn signalsLicense plate holders do not require registration; the LED license plate light has the required E-mark, and a reflector with mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike)

At the license plate holder IQ5 for Honda CB500F (2019-2021) for ZBthe turn signals are mounted above the license plate on the holder for the reflector and license plate light. The big advantage is, it looks good and , is "tidy" and any license plate width is possible!easy mounting at the original mounting pointsno cutting of the original fairing parts necessarylight and extremely stableMaterials: stainless steel and/or aluminiumblack powder coatingsteplessly adjustable in height and inclinationthe inclination of the license plate holder can be adjusted steplessly to the legally required inclination of 30°.Included in delivery:License plate holder with LED license plate light and self-adhesive reflector ECE testedTurn signal mounting for accessory turn signalMounting material: screws, nuts, washers, etc.License plate holder are TÜV, ABE and registration freeDo you have any questions? We advise you gladly.The partly on the pictures shown turn signals do not belong to the scope of supply, can be ordered however also with us.

At the license plate holder IQ5 for Suzuki GSX-S 1000 | 950 (2021-2025)the turn signals are mounted above the license plate on the holder for the reflector and license plate light. The big advantage is, it looks good and , is "tidy" and any license plate width is possible!easy mounting at the original mounting pointsno cutting of the original fairing parts necessarylight and extremely stableMaterials: stainless steel and/or aluminiumblack powder coatingsteplessly adjustable in height and inclinationthe inclination of the license plate holder can be adjusted steplessly to the legally required inclination of 30°.Included in delivery:License plate holder with LED license plate light and self-adhesive reflector EC approvedOptionally for original turn signals or accessory turn signalsMounting material: screws, nuts, washers, etc.License plate holder are TÜV, ABE and registration freeDo you have any questions? We advise you gladly.The partly on the pictures shown turn signals do not belong to the scope of supply, can be ordered however also with us.

At the license plate holder IQ5 for Yamaha MT-09 (2021-2023)the turn signals are mounted above the license plate on the holder for the reflector and license plate light. The big advantage is, it looks good and , is "tidy" and any license plate width is possible!easy mounting at the original mounting pointsno cutting of the original fairing parts necessarylight and extremely stableMaterials: stainless steel and/or aluminiumblack powder coatingsteplessly adjustable in height and inclinationthe inclination of the license plate holder can be adjusted steplessly to the legally required inclination of 30°.Included in delivery:License plate holder with LED license plate light and self-adhesive reflector ECE testedTurn signal mounting for original turn signalsMounting material: screws, nuts, washers, etc.License plate holder are TÜV, ABE and registration freeDo you have any questions? We advise you gladly.The partly on the pictures shown turn signals do not belong to the scope of supply, can be ordered however also with us.

The IQ4 license plate holder for original turn signals. Turn signals next to the license plate, reflector above the license plate.If you’re looking for a sporty and modern design, you really can’t go past this license plate holder. The IQ4 series stands out for its unbeatable compactness. Small, lightweight, sturdy, and—with the reflector positioned above the license plate—a real visual treat.It mounts to the original mounting points. Body panels remain undamaged, and removal is hassle-free.TecBike uses only the finest materials. The matte black powder coating is purely for aesthetic purposes. The angle of the license plate holder can be continuously adjusted to the legally required 30° angle.You’ll receive the license plate holderfor original turn signalsLicense plate holders do not require registration; the LED license plate light has the required E-mark, and a reflector with mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike)

On the license plate holder IQ5 for CFMoto 450SR | 450NK (2023-2025)the turn signals are mounted above the license plate on the holder for the reflector and license plate light. The big advantage is, it looks good and , is "tidy" and any license plate width is possible!easy mounting on the original mounting pointsno cutting of the original fairing parts necessarylight and extremely stableMaterials: stainless steel and/or aluminumblack powder coatingsteplessly adjustable in height and inclinationthe inclination of the license plate holder can be infinitely adjusted to the legally required inclination of 30°.Included in delivery:License plate holder with LED license plate light and self-adhesive reflector EC approvedOptionally for original turn signals or accessory turn signalsMounting material: screws, nuts, U washers, etc.License plate holder are TÜV, ABE and registration freeDo you have any questions? We advise you gladly.The partially shown in the pictures turn signals are not included, but can also be ordered from us.

On the license plate holder IQ5 for CFMoto 650NK (2020-2024)the turn signals are mounted above the license plate on the holder for the reflector and license plate light. The big advantage is, it looks good and , is "tidy" and any license plate width is possible!easy mounting on the original mounting pointsno cutting of the original fairing parts necessarylight and extremely stableMaterials: stainless steel and/or aluminumblack powder coatingsteplessly adjustable in height and inclinationthe inclination of the license plate holder can be infinitely adjusted to the legally required inclination of 30°.Included in delivery:License plate holder with LED license plate light and self-adhesive reflector EC approvedOptionally for original turn signals or accessory turn signalsMounting material: screws, nuts, U washers, etc.License plate holder are TÜV, ABE and registration freeDo you have any questions? We advise you gladly.The partially shown in the pictures turn signals are not included, but can also be ordered from us.

The IQ4 license plate holder for original turn signals. Turn signals next to the license plate, reflector above the license plate.If you’re looking for a sporty and modern design, you really can’t go past this license plate holder. The IQ4 series stands out for its unbeatable compactness. Small, lightweight, sturdy, and—with the reflector positioned above the license plate—a real visual treat.It mounts to the original mounting points. Body panels remain undamaged, and removal is hassle-free.TecBike uses only the finest materials. The matte black powder coating is purely for aesthetic purposes. The angle of the license plate holder can be continuously adjusted to the legally required 30° angle.You’ll receive the license plate holderfor original turn signalsLicense plate holders do not require registration; the LED license plate light has the required E-mark certification, and a reflector with mount is also included in the package.(The turn signals shown in some of the pictures are not included, but can also be ordered from TecBike)