Axle protectors & fork protectors - safe on the road with crash pads
Axle protectors and fork protectors absorb the impact energy in the event of a fall on the road and in racing. They reduce the ground contact of sensitive components and are usually made of abrasion-resistant special plastic. If these protectors are used in combination, you have a continuous line of protection around the bike. Most protectors can be attached directly to existing mounting points without any adjustments and, with the right tools and a little technical knowledge, fitting them is no problem even for amateur mechanics.
The difference between axle protectors and fork protectors
Fork protectors and axle protectors are among the most important protective parts for your motorcycle - but they fulfill different tasks and are fitted in different places.
Axle protectors are mounted on the front or rear axle of your motorcycle and protect components such as the axle nut, swingarm or wheel bearings in the event of a crash.
Fork protectors, on the other hand, sit directly on the lower fork and protect fork ends and sensitive seals from grinding and crash damage.
Advantages of axle protectors on motorcycles
- Protection in the event of a fall or crash
Axle protectors protect sensitive components such as axle nuts, wheel bearings, fork ends or swing arms from direct contact with the ground and scuff marks. - Avoid expensive repairs
They reduce the risk of deformation or damage to the chassis, axle or brakes - and thus significantly reduce potential repair costs. - Energy absorption on impact
High-quality materials such as POM plastic or glass fibre-reinforced composites absorb impact forces and minimize consequential damage. - Easy installation without conversions
Most axle protectors are simply attached to the existing axle ends - often without tools and without modifications to the motorcycle. - Low weight with high protective effect
They offer maximum protection with minimum weight - perfect for sporty riders or everyday use.
Advantages of fork protectors on the motorcycle
- Protection of the fork ends in the event of a fall or skid
Fork protectors protect the lower ends of the front fork from direct contact with the ground - a common weak point in the event of a fall or minor crash. - Prevention of seal and bearing damage
Scratches or deformations on the fork can lead to leaking oil seals, damaged guides or limited suspension function - fork protectors prevent this. - Reduction in repair costs
Replacing or repairing fork components is expensive - with fork protectors, such consequential costs can be avoided. - Additional protection for brake components
When positioned correctly, fork protectors also protect adjacent components such as brake callipers or ABS sensors from contact with the asphalt. - Lightweight, high level of protection
Made from abrasion-resistant special plastic such as POM or glass-fiber reinforced plastic, fork protectors offer robust protection with minimal weight. - Simple installation without special tools
Fork protectors can usually be bolted directly to the front axle or fork in just a few simple steps - without any modifications to the motorcycle. - Perfect addition to axle protectors & crash pads
For complete protection in the event of a fall or skid, fork protectors are the ideal complement to axle protectors and frame protectors.
Crash pads in motorcycle racing
In professional or semi-professional racing, crash pads provide targeted protection for the central components of a motorcycle in the event of high-speed crashes - e.g. on the race track or in trackday use. Special high-performance plastics (e.g. POM or PA6) guarantee controlled sliding instead of catching. As racing requires short pit stops, these crash pads are easy to replace and minimize downtime after a crash.
Axle protectors in racing
A high-speed crash can put extreme strain on the axle. Without axle protectors, you risk damage to the axle carrier, wheel bearings or swingarm, which can lead to immediate failure or costly repairs. In racing, axle sliders are specially developed protective components that are mounted on the front and rear axle of your motorcycle and allow controlled slipping. Racing axle sliders are compact and aerodynamically shaped so that they do not negatively affect handling and performance. Many racing series and circuits require axle protectors to be fitted as part of the mandatory safety equipment. In short: Axle protectors are a must-have protective part in motorcycle racing, helping you to avoid expensive repairs and protect your racing machine in the best possible way in an emergency.
The asymmetrical design of the GTA-F-Y03 axle protector from GILLES, for example, was inspired directly by the race track. On one side there is a rounded impact body made of special plastic for the best grinding properties (impact and abrasion-resistant material). On the other side there is a conically shaped impact body made of milled aluminum.
Fork protectors in racing
In racing, fork protectors are important protective components that are fitted to the lower ends of the front fork. They protect the sensitive fork tubes, seals and brake callipers from damage in the event of crashes or skidding on the race track. They prevent leaks, as scratches and dirt can damage oil seals and gaskets, leading to oil loss and poorer fork function. Fork protectors significantly minimize this risk. These crash pads also prevent brake callipers or cables from coming into direct contact with the ground, which maintains braking performance and safety on the track. Made from robust plastic such as POM or polyamide, fork protectors enable controlled sliding on the asphalt without the motorcycle getting stuck or stopping abruptly.
Conclusion: For racing riders, fork protectors are an indispensable part of the crash protection system - together with axle protectors, engine cover protectors and crash pads, they offer comprehensive protection for your bike on the racetrack.
Buy crash pads for your motorcycle
At TecBike, we attach great importance to high quality, product safety and durability. In our store you will find everything you need for a legal and stylish conversion or for the racetrack, including axle protectors and fork protectors. You have the option of collecting your accessories directly from our store in person or having them delivered to your home. If you have any questions, simply use the form on the website in the service/help section, send us an e-mail or give us a call, we are always happy to help.
Axle protectors & fork protectors - safe on the road with crash pads Axle protectors and fork protectors absorb the impact energy in the event of a fall on the road and in racing. They reduce...
read more » Close window Axle protectors & fork protectors - safe on the road with crash pads
Axle protectors and fork protectors absorb the impact energy in the event of a fall on the road and in racing. They reduce the ground contact of sensitive components and are usually made of abrasion-resistant special plastic. If these protectors are used in combination, you have a continuous line of protection around the bike. Most protectors can be attached directly to existing mounting points without any adjustments and, with the right tools and a little technical knowledge, fitting them is no problem even for amateur mechanics.
The difference between axle protectors and fork protectors
Fork protectors and axle protectors are among the most important protective parts for your motorcycle - but they fulfill different tasks and are fitted in different places.
Axle protectors are mounted on the front or rear axle of your motorcycle and protect components such as the axle nut, swingarm or wheel bearings in the event of a crash.
Fork protectors, on the other hand, sit directly on the lower fork and protect fork ends and sensitive seals from grinding and crash damage.
Advantages of axle protectors on motorcycles
- Protection in the event of a fall or crash
Axle protectors protect sensitive components such as axle nuts, wheel bearings, fork ends or swing arms from direct contact with the ground and scuff marks. - Avoid expensive repairs
They reduce the risk of deformation or damage to the chassis, axle or brakes - and thus significantly reduce potential repair costs. - Energy absorption on impact
High-quality materials such as POM plastic or glass fibre-reinforced composites absorb impact forces and minimize consequential damage. - Easy installation without conversions
Most axle protectors are simply attached to the existing axle ends - often without tools and without modifications to the motorcycle. - Low weight with high protective effect
They offer maximum protection with minimum weight - perfect for sporty riders or everyday use.
Advantages of fork protectors on the motorcycle
- Protection of the fork ends in the event of a fall or skid
Fork protectors protect the lower ends of the front fork from direct contact with the ground - a common weak point in the event of a fall or minor crash. - Prevention of seal and bearing damage
Scratches or deformations on the fork can lead to leaking oil seals, damaged guides or limited suspension function - fork protectors prevent this. - Reduction in repair costs
Replacing or repairing fork components is expensive - with fork protectors, such consequential costs can be avoided. - Additional protection for brake components
When positioned correctly, fork protectors also protect adjacent components such as brake callipers or ABS sensors from contact with the asphalt. - Lightweight, high level of protection
Made from abrasion-resistant special plastic such as POM or glass-fiber reinforced plastic, fork protectors offer robust protection with minimal weight. - Simple installation without special tools
Fork protectors can usually be bolted directly to the front axle or fork in just a few simple steps - without any modifications to the motorcycle. - Perfect addition to axle protectors & crash pads
For complete protection in the event of a fall or skid, fork protectors are the ideal complement to axle protectors and frame protectors.
Crash pads in motorcycle racing
In professional or semi-professional racing, crash pads provide targeted protection for the central components of a motorcycle in the event of high-speed crashes - e.g. on the race track or in trackday use. Special high-performance plastics (e.g. POM or PA6) guarantee controlled sliding instead of catching. As racing requires short pit stops, these crash pads are easy to replace and minimize downtime after a crash.
Axle protectors in racing
A high-speed crash can put extreme strain on the axle. Without axle protectors, you risk damage to the axle carrier, wheel bearings or swingarm, which can lead to immediate failure or costly repairs. In racing, axle sliders are specially developed protective components that are mounted on the front and rear axle of your motorcycle and allow controlled slipping. Racing axle sliders are compact and aerodynamically shaped so that they do not negatively affect handling and performance. Many racing series and circuits require axle protectors to be fitted as part of the mandatory safety equipment. In short: Axle protectors are a must-have protective part in motorcycle racing, helping you to avoid expensive repairs and protect your racing machine in the best possible way in an emergency.
The asymmetrical design of the GTA-F-Y03 axle protector from GILLES, for example, was inspired directly by the race track. On one side there is a rounded impact body made of special plastic for the best grinding properties (impact and abrasion-resistant material). On the other side there is a conically shaped impact body made of milled aluminum.
Fork protectors in racing
In racing, fork protectors are important protective components that are fitted to the lower ends of the front fork. They protect the sensitive fork tubes, seals and brake callipers from damage in the event of crashes or skidding on the race track. They prevent leaks, as scratches and dirt can damage oil seals and gaskets, leading to oil loss and poorer fork function. Fork protectors significantly minimize this risk. These crash pads also prevent brake callipers or cables from coming into direct contact with the ground, which maintains braking performance and safety on the track. Made from robust plastic such as POM or polyamide, fork protectors enable controlled sliding on the asphalt without the motorcycle getting stuck or stopping abruptly.
Conclusion: For racing riders, fork protectors are an indispensable part of the crash protection system - together with axle protectors, engine cover protectors and crash pads, they offer comprehensive protection for your bike on the racetrack.
Buy crash pads for your motorcycle
At TecBike, we attach great importance to high quality, product safety and durability. In our store you will find everything you need for a legal and stylish conversion or for the racetrack, including axle protectors and fork protectors. You have the option of collecting your accessories directly from our store in person or having them delivered to your home. If you have any questions, simply use the form on the website in the service/help section, send us an e-mail or give us a call, we are always happy to help.
